Abstract:Continuous silicon carbide fiber–reinforced silicon carbide matrix (SiCf/SiC) composites have developed into a promising candidate for structural materials for high–temperature applications in aerospace engine systems. This is due to their advantageous properties, such as low density, high hardness and strength, and excellent high temperature and oxidation resistance. In this study, SiCf/SiC composites were fabricated via polymer infiltration and pyrolysis (PIP) with the lower–oxygen–content KD–II SiC fiber as the reinforcement; a mixture of 2,4,6,8–tetravinyl–2,4,6,8–tetramethylcyclotetrasiloxane (V4) and liquid polycarbosilane (LPCS), known as LPVCS, was used as the precursor; while pyrolytic carbon (PyC) was used as the interface. The effects of oxidation treatment at different temperatures on morphology, structure, composition, and mechanical properties of the KD–II SiC fibers, SiC matrix from LPVCS precursor conversion, and SiCf/SiC composites were comprehensively investigated. The results revealed that the oxidation treatment greatly impacted the mechanical properties of the SiC fiber, thereby significantly influencing the mechanical properties of the SiCf/SiC composite. After oxidation at 1300°C for 1h, the strength retention rates of the fiber and composite were 41% and 49%, respectively. In terms of the phase structure, oxidation treatment had little effect on the SiC fiber, while greatly influencing the SiC matrix. A weak peak corresponding to silica (SiO2) appeared after high–temperature treatment of the fiber; however, oxidation treatment of the matrix led to the appearance of a very strong diffraction peak that corresponds to SiO2. The analysis of the morphology and composition indicated cracking of the fiber surface after oxidation treatment, which was increasingly obvious with the increase in the oxidation treatment temperature. The elemental composition of the fiber surface changed significantly, with drastically decreased carbon element content and sharply increased oxygen element content.

Carbonization Treatment on Performance of Carbon Fibre Reinforced Polyimide Composite Materials

Preparation and imidization of polyimide composites filled with boron nitride

Effect of high-temperature thermo-oxidation on the mechanical and electrical properties of phenylethynyl-terminated polyimide/carbon fiber composite

Effect of high temperature desizing treatment of carbon fiber on thermal aging of polyimide composites

Study on the Structure of SiC/PI Composite Film and Its Performance in Carbonization Process

Effects of argon plasma treatment on carbon fiber surface characteric and its reinforcing polyimide composites interfacial properties at room and elevated temperatures

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

Friction and wear behavior of thermoplastic polyimide reinforced with carbon fiber

Preparation and Properties of Chopped Carbon Fiber Reinforced Polyimide Composite Foams

The Effect of Carbon Fiber Content on the Friction and Wear Properties of Carbon Fiber Reinforced Polyimide Composites

Catalytic and Enhanced Effects of Silicon Carbide Nanoparticles on Carbonization and Graphitization of Polyimide Films

Effects of pyrochemical treatment for producing interfacial carbon layer on tensile properties of polymer-derived-matrix-based SiC/SiC composites

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Effect of electrochemical anodic oxidation modification on the interfacial properties of carbon fiber reinforced polyimide composites

Molding process and properties of polyimide-fiber-fabric-reinforced polyether ether ketone composites

Impact of Modification of Carbon Black on Morphology and Performance of Polyimide/carbon Black Hybrid Composites.

Effect of Oxidation Treatment on KD–II SiC Fiber–reinforced SiC Composites

Improved Melt Processabilities of Thermosetting Polyimide Matrix Resins for High Temperature Carbon Fiber Composite Applications

High performance thermoplastic polymer for the compressive behaviour of carbon fibre reinforced composites

Raman mapping microspectroscopy of the effects of cryogenic cycling on the interfacial micromechanics of carbon fiber-reinforced polyimide composites

Significantly improving mechanical properties of CF/PAI composites: the influence of interfacial modification coupled with post heat treatment