Abstract:High-volume-fraction SiC/Al (HVF-SiC/Al) composites have a wide range of applications in aerospace, optics, automotive and electronic packaging. However, because the hardness, brittleness and wear resistance increase with the increase in the volume fraction, it is difficult for traditional methods such as machining, to process HVF-SiC/Al composites to complex components. Therefore, in this paper, a novel method of the hybrid additive manufacturing is proposed to fabricate complex-structures SiC/Al composite parts. The effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of HVF-SiC/Al composites is investigated. The results show that the mechanical properties of the SiC preforms can be effctively enhanced by the PIP process, and this enhancement makes the SiC preforms meet the conditions for subsequent vacuum-pressure infiltration. The mechanical property of HVF-SiC/Al composites show a huge increase when in creasing the volume fraction of SiC. In particular, the flexural strength of HVF-SiC/Al composites increased from 202.28 MPa to 380.87 MPa, and the coefficient of thermal expansion (CTE) has also been reduced from 11.80 to 6.28 × 10 -6 /K, when the volume fraction of SiC increases from 42 to 80 vol%. For optimise the PIP process in the future, three theoretical models are used to predict the relationship between the CTE and the volume fraction of SiC. The results show that the experimental data are more consistent with the predicted values based on the Kerner's model, but deviate from the Rule-of-mixture (ROM) and Turner's models. Importantly, the complex-structures SiC/Al composite parts was successfully fabricated by this hybrid additive manufacturing.

Processing and mechanical performance of 3D Cf/SiCN composites prepared by polymer impregnation and pyrolysis

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Mechanical properties and high temperature failure mechanism of carbon fibers reinforced polysilazane-derived SiCN ceramic matrix composites via PIP process

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

Effect of pyrolysis temperatures on the performance of SiCf/SiC composites

Preparation of SiC fiber-reinforced SiC composites

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Effects of pyrolysis temperatures on the oxidation behavior of PIP-processed SiCf/SiC composites

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Preparation of Cf/Si3N4 composites based on vat photopolymerization combined with precursor infiltration and pyrolysis

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

C/C–SiC Composites Derived from Single‐source Poly(silylene–acetylene) Precursors

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Building SiC-based composites from polycarbosilane-derived 3D-SiC scaffolds via polymer impregnation and pyrolysis (PIP)

Fabrication of dense Cf/SiC ceramic matrix composites using 3D printing and PIP with short carbon fibre as a toughening material

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes