Experimental study on seismic behavior of concrete grillage walls

王奇,钱稼茹,马宝民,胡庆昌,冯葆纯

DOI: https://doi.org/10.3321/j.issn:1000-6869.2004.04.003

2004-01-01

Abstract:Experimental work on 11 concrete grillage walls using heat preservation block as forms with shear span ratios of 1.96 to 3.06 and a solid concrete wall is introduced. In which 8 grillage walls and the soild wall were tested under vertical load and cyclic lateral load,and 3 grillage walls were tested under axial compressive load. The test results showed that under the action of vertical load and cyclic lateral load, the grillage walls failed due to yield of the longitudinal reinforcement and concrete crushing at the bottom of the wall ends as well as shear failure of coupling beams. The distribution of cracks was rather scattered at failure, and the displacement ductility ratio was larger than 3.0 and the ultimate displacement angle was larger than 1/100. The wall section length and the end columns had significant effect on enhancing the elastic stiffness, the tangent stiffness at yield and the flexural ultimate strength of the grillage walls. The out plane instability would not happen in grilled walls with normal story height. The finite element analysis showed that the normal stress distribution of the grillage wall was about the same as that of the solid wall. The flexural strength of the concrete grillage wall can be calculated by the current code formula of reinforced concrete shear walls. An engineering example shows that the concrete grillage wall system satisfies the story drift limit requirement, the flexural strength requirement and the shear strength requirement for a 9 story residential building with earthquake fortification intensity 8. Based on the study the seismic design recommendations of grillage walls are presented.