Abstract:Microfluidic chips have been widely applied in biology and medical research for stably generating uniform droplets that can be solidified into hydrogel microspheres. However, issues such as low microsphere yield, lengthy experimental processes, and susceptibility to environmental interference need to be addressed. In this work, a simple and effective method was developed to modify microfluidic chips at room temperature to improve the production performance of hydrogel microspheres. Numerical simulation-assisted experiments were conducted to comprehensively understand the effect of solution viscosity, hydrophilicity, and flow rate ratio on droplet formation during microsphere production. Chitosan was selected as the main component and combined with poly(ethylene glycol) diacrylate to prepare photocurable hydrogel microspheres as a demonstration. As a result, grafting fluoro-silane (FOTS) increased the contact angle of the channel from 90 to approximately 110°, which led to a 12.2% increase in droplet yield. Additionally, FOTS-modification attenuated the impact of the flow rate ratio on droplet yield by 19.1%. Alternatively, depositing dopamine decreased the channel's contact angle from 90 to 60°, resulting in a 21.4% increase in particle size and enabling the chip to adjust droplet size over a wider range. Further study demonstrates that the obtained hydrogel microspheres can be modified with layers of aldehyde, which can potentially be used for controlled drug release. Overall, this study proposed a facile method for adjusting the yield and droplet size through surface treatment of microfluidic chips while also enhancing the understanding of the synergistic effects of multiple factors in microfluidics-based microsphere production.

Synthesis of Monodisperse PEG Hydrogel Microball Using a Droplet Microfluidic Chip and Its Size Control

Preparation of monodisperse PEG hydrogel composite microspheres via microfluidic chip with rounded channels

Preparation of Monodisperse PEG Microspheres by a T-Junction Microfluidic Chip

Generation Of Size-Controlled Poly (Ethylene Glycol) Diacrylate Droplets Via Semi-3-Dimensional Flow Focusing Microfluidic Devices

Optimizing the Production of Hydrogel Microspheres Using Microfluidic Chips: The Influence of Surface Treatment on Droplet Formation Mechanism

Facile Microfluidic Fabrication of Biocompatible Hydrogel Microspheres in a Novel Microfluidic Device

Rational Design of Liquid-Liquid Microdispersion Droplet Microreactors for the Controllable Synthesis of Highly Uniform and Monodispersed Dextran Microspheres

Non-swelling hydrogel-based microfluidic chips.

Preparation and Characterization of Microscaled Silica Areogel Balls by Emulsion Method

The Rapid Fabrication of Hydrogel Microfluidic Chip for Cell Capture Culture and Metabolites Detection

Preparation of 10μm scale monodispersed particles by jetting flow in coaxial microfluidic devices

Synthesis of Size-Controlled and Uniform SDB-TPGDA Porous Microspheres by Microfluidic Technology

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Synthesis of Monodisperse Polystyrene Microspheres for Liquid Biochips

Preparation of monodisper microsphere by controlled droplet solidification

The microfluidic chip fabricated by Hot Embossing Lithography for single- microsphere test

Novel synthesis of PVA/GA hydrogel microspheres based on microfluidic technology

Generation of Monodisperse Particles by Using Microfluidics: Control over Size, Shape, and Composition

Droplet shape control using microfluidics and designer biosurfactants

Manipulating T-Junction Chip for the Generation of Uniform O/W and W/O Emulsions

Microfluidic Fabrication of Water-in-water Droplets Encapsulated in Hydrogel Microfibers