Abstract:Hollow microspheres have potential applications for wide‐range fields, especially photocatalysis, attracting tremendous attention in material science. However, conventional synthesis of hollow microspheres involves complicated procedures, high cost and poor yields, greatly impeding their development. Due to the limitations of raw material for the polymerization or hydrolysis routes so far the hollow materials prepared in a microfluidics chip were limited to some specific substances. Herein, a controllable precipitating reaction strategy in droplets was presented to form the hollow structure from easily accessible industrial chemical materials (such as nitrates of Zinc, Copper and Cobalt, and Ferrous sulfate). After generating monodisperse droplets and followed introducing precipitant into the droplets in a microfluidics chip, the spherical shell was constructed through the accumulation of precipitated particles at the oil/water interface of droplets and further particle growth on the inner shell. As a result, hollow microspheres with a Janus shell of different inner and outer morphology were formed. The photocatalytic activities of these hollow microspheres were evaluated for RhB photodegradation oxidation based on heterogeneous photo‐Fenton. The photocatalytic activities of the fresh hollow samples showed better than their solid samples or their oxidized hollow samples. With microfluidic technology, the transition‐metallic inorganic hollow microspheres can be rapid, low‐costly manufactured through direct precipitation reaction in droplets. The prepared α‐Co(OH)2 hollow microspheres showed promising photocatalytic activity. © 2021 Society of Chemical Industry (SCI).

Preparation of monodisper microsphere by controlled droplet solidification

Rational Design of Liquid-Liquid Microdispersion Droplet Microreactors for the Controllable Synthesis of Highly Uniform and Monodispersed Dextran Microspheres

Rational Design of Droplet Microfluidic Reactors for Controllable Non-Newton Viscous Production of Functional Chitosan Microspheres

Synthesis of uniform-size hollow silica microspheres through interfacial polymerization in monodisperse water-in-oil droplets

Progress in Preparation of Microspheres Using Microfluidic Devices

Functional monodisperse microspheres fabricated by solvothermal precipitation co-polymerization

Study on the Technology of Monodisperse Droplets by a High-Throughput and Instant-Mixing Droplet Microfluidic System

Preparation of micrometer SiO_2 by two-phase sol-gel method

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Preparation of 10μm scale monodispersed particles by jetting flow in coaxial microfluidic devices

Preparation of Monodisperse YSZ Ceramic Microspheres by High-Throughput and Instant-Mixing Droplet Microfluidic System

An improvement of microfluidic‐assisted internal gelation in the preparation of millimeter‐sized ceramic microspheres

Controllable Inducing Preparation of Polymorphous Hundred-Micron Alumina Microspheres Via Droplet-Based Two-Stage Microfluidic Solvent Extraction Technology

Droplet Microfluidics For The Production Of Microparticles And Nanoparticles

Facile precipitation microfluidic synthesis of Monodisperse and inorganic hollow microspheres for Photocatalysis

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Preparation of Monodisperse ZrO2 Ceramic Microspheres (>200 Μm) by Co-Axial Capillary Microfluidic Device Assisted Internal Gelation Process

Fabrication of monodisperse, large-sized, functional biopolymeric microspheres using a low-cost and facile microfluidic device

Formation of Monodisperse Cross-Linked Nanospherial Condensates Based on Flow-Focusing and Droplet Diffusion Techniques

Enhanced Control and Efficiency in Millimeter-Scale Composite Droplets Preparation

Generation of Monodisperse Mesoporous Silica Microspheres with Controllable Size and Surface Morphology in a Microfluidic Device