Abstract:In this work, a numerical simulation model was developed to investigate the complex heat and mass transfer process inside the molten pool during plasma surfacing. The temperature distribution and fluid flow were employed to depict the evolution of the molten pool. The findings revealed that the maximum temperature is located on the surface of the cladding layer corresponding to the position of heat source, and the temperature distribution follows a Gaussian distribution along the scanning direction. Thermal accumulation is obvious due to the continuous energy input in the initial stage, as a result, the maximum temperature and fluid flow velocity gradually increase with the deposition process. The maximum temperature and fluid flow velocity at 4.0 s are 1893 K and 0.281 m/s in case 110 A, respectively. The predicted shapes and dimensions are consistent with the results of the deposition experiments, with a maximum error of no more than 15 %. In order to investigate the impact of WC particles on the solidification microstructure of nickel composite layers, corresponding plasma surfacing experiment was implemented. The solidification characteristics of the microstructure follow planarcellular-columnar-equiaxed crystals in the bonding layer and WC particles-columnar-equiaxed dendritic crystals in hard layer, respectively. Furthermore, the Ni dendritic near the retained WC particles transformed into columnar crystals due to temperature gradient in the local area.

Formation Mechanism and Morphology of Solidification Structure in a Light Beam Powder Surfacing Layer

Solidification Characteristics of Molten Pool and Formation Mechanism of Microstructure of Light Beam Surfacing Layer

MICROSTRUCTURE AND STRENGTHENING MECHANISM OF Ni-BASED ALLOY POWDER SURFACING LAYER BY LIGHT BEAM

Formation and Precipitation Phases of Ni-Al System Intermetallic Surfacing Layers by Light Beam Heating

Study on the Quality of Ni-based Alloy Light Beam Powder Surfacing

Dilution Rate and Microstructure of TIG Arc Ni-Al Powder Surfacing Layer

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Characteristic of bond zone between powder surfacing layer and base metal

Carbide-reinforced Ni-based Alloy Surfacing Layer Synthesized by Light Beam Heating

Microstructure and Strengthening Mechanism of Light Beam Cladding Layer with Iron-based Self-fluxing Alloy Powder

Multi-scale Modelling of Solidification and Microstructure Evolution in Laser-Deposition of T15 High Speed Steel

Solidification Behavior of WC Particles Reinforced Nickel Alloy Cladding Layers by Plasma Surfacing: Simulation and Experiment

Effect of heat input on precipitation characteristic and order degree of Ni3Al in light beam surfacing layer

Evolutionary Mechanism of Solidification Behavior in the Melt Pool during Disk Laser Cladding with 316L Alloy

Effect of Fe on the formation of NiAl intermetallic light beam surfacing layer and its microstructure

Microstructures and homogenization behavior of a nickel-based superalloy used for 850¬Ý‚ÑÉ turbine disc prepared by electron beam smelting layered solidification

Development of Microstructures in Laser Surface Remelting of Dd2 Single Crystal

Surface morphology evolution of GTD-450 stainless steel during laser powder bed fusion

The role of side-branching in microstructure development in laser powder-bed fusion

Influence of the Materials on the Solidification Microstructure of Laser Multi-Layer Cladding

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification