Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

A Sinusoidal Power Clock Generation Circuit for Energy Recovery Logic

Study and design of an on chip clock generator with high stability

New Design of Clock Self Recovery Circuit Based on Time-to-voltage Conversion

2.5 Mw 2.73 GHz Non-Overlapping Multi-Phase Clock Generator with Duty-Cycle Correction in 0.13 Μm CMOS

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A novel high-accuracy clock stabilizer with 50% duty cycle

Design of All-digital Clock Recovery Unit Based on USB Device

A Clock Isolation Technique for Low Power SoC Design

A 2.4 mW 2.5 GHz multi-phase clock generator with duty cycle imbalance correction in 0.13 µm CMOS

10 Gb/s Linear Full-Rate CMOS Phase Detector for Clock Data Recovery Circuit

Non-Sequential Linear Cmos Phase Detector for Cdr Applications

Clocked Quasi-Static Energy Recovery Logic

Energy Recovery Threshold Logic and Power Clock Generation Circuits

A low-power 10Gb/s CMOS clock and data recovery circuit with a quarter-rate phase detector

Design of a High-speed Integrated PLL for Clock Recovery Circuit

A Multiphase Clock Generation Based On Dll For Source Synchronous Receiver In 65nm Cmos Technology

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

A fully integral, differential, high-speed, low-power consumption CMOS recovery clock circuit

Improved Energy Recovery Logic for Low Power Computation

Direct Decoupled Synchronization Method for Power Electronic Converters under Unbalanced and Distorted Operation Conditions

A New Architecture High Speed Clock and Data Recovery Circuit