Abstract:Software clock data recovery (CDR) is a critical component of a high-speed serial link that recovers the reference clock from a serial signal, which are generally used in real-time sampling oscilloscopes and electronic design automation software. The common method for calculating the period of the reference clock is to extract the rising and falling edges of the signal, and then calculate the difference between adjacent transition edges, so that a pulse width sequence is obtained. By performing statistics on this sequence, it can be found that the value of the position of the first peak of the statistical histogram is the period of the reference clock, the position of the second peak is twice the period of the clock, etc. The period of the clock can be calculated by weighted average. However, high-speed serial signals inevitably have duty-cycle-distortion (DCD) jitter, and DCD seriously affect the determination of the position of the peak of the above statistical histogram, there are many spurious peaks near the actual peak. This article proposes an improved method of calculating the clock period, which can eliminate the influence of DCD and to obtain an accurate clock period.

A novel high-accuracy clock stabilizer with 50% duty cycle

Study and design of an on chip clock generator with high stability

A Synchronous Boost Converter with High Speed and High Accuracy Peak Current Control Unit.

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

2.5 Mw 2.73 GHz Non-Overlapping Multi-Phase Clock Generator with Duty-Cycle Correction in 0.13 Μm CMOS

A 2.4 mW 2.5 GHz multi-phase clock generator with duty cycle imbalance correction in 0.13 µm CMOS

A High‐resolution Hybrid Digital Pulse Width Modulator with Dual‐edge‐triggered Flip‐flops and Hardware Compensation

A Low-Jitter Fast-Locking Multi-Phase Clock for High Resolution Ccd Processor

A 20 GHz High Speed, Low Jitter, High Accuracy and Wide Correction Range Duty Cycle Corrector.

A Novel Low-Power and High-Speed Dual-Modulus Prescaler Based on Extended True Single-Phase Clock Logic.

A Programmable Dco-Based Digital Clock Multiplier and Divider

A Multiphase Clock Generation Based On Dll For Source Synchronous Receiver In 65nm Cmos Technology

A Self-Regulating Negative Charge Pump Using Multi-Phase Clock for Wideband ADCs

Low-power, High-Speed Dual Modulus Prescalers Based on Branch-Merged True Single-Phase Clocked Scheme

Design of CMOS Clock Synthesizer for Data Converters

A high precision TDC based on a multi-phase clock

A True Single-Phase Clock Dual-Modulus Prescaler with Enhanced Robustness Against Leakage Currents

A 12bit 39ps Two-Step Time-to-Digital Converter in 40nm CMOS

An Improved Clock Cycle Measurement Method for High-Speed Serial Signal with Duty-Cycle-Distortion Jitter

A 10-Bit 563-Fs Step Constant-Slope Digital-to-Time Converter in 40-Nm CMOS with Nonlinearity Cancellation and Range Extension Techniques

A Dll Based Low-Phase-Noise Clock Multiplier with Offset-Tolerant Pfd