Abstract:A method for determining iron in seawater had been developed by coupling reverse flow injection analysis (rFIA) and catalytic spectrophotometric detection with N,N-dimethyl-p-phenylenediamine dihydrochloride (DPD). With a seawater sample or a standard solution as the carrier, the mixture of DPD and buffer was injected into the carrier stream quantitatively and discretely. After mixing with H(2)O(2), the DPD was oxidized to form two pink semiquinone derivatives that were monitored at 514 nm wavelength with a reference at 700 nm. The method detection limit was 0.40 nmol L(-1), lower than half of that of normal flow injection analysis (nFIA) method. The sample throughput was 10h(-1) with triplicate determination, compared with 4h(-1) for nFIA-DPD method. The analysis results of the certified seawaters CASS-4 (12.33 ± 0.18 nmol L(-1)) and NASS-5 (3.47 ± 0.23 nmol L(-1)) well agreed with the certified values (12.77 ± 1.04 and 3.71 ± 0.63 nmol L(-1), respectively). The typical precision of the method for a 2.97 nmol L(-1) iron sample was 4.49% (n=8). Interferences from copper and salinity were investigated. An instrument was assembled based on the proposed method and applied successfully to analyze total dissolvable iron (TDFe) in surface seawater samples collected from the Pearl River Estuary, the results of which revealed non-conservative behavior of TDFe during the estuarine mixing. Results for these samples with both rFIA-DPD and nFIA-DPD methods showed good agreement with each other. The proposed method was superior to the currently used nFIA-DPD method, particularly when it is adapted for field and in situ deployment, due to its lower reagent consumption, higher sample throughput and keeping the manifold tubing clean.

Rapid Determination of Iron in Waters with the Reagent Tablet

Development of facile field-test paper for rapid determination of iron contamination in natural water of acid sulfate soils

A Simple, Sensitive and Selective Spectrophotometric Method for Determining Iron in Water Samples

A Kinetic Spectrophotometric Method for the Determination of Iron （III） in Water Samples

A Direct and Rapid Method for Determination of Total Iron in Environmental Samples and Hydrometallurgy Using UV–Vis Spectrophotometry

Light-absorption ratio variation approach to sensitive and selective determination of iron with trimethoxyphenylflurone, cetylpyridinium, and thioglycollic acid

Rapid Speciation of Trace Iron in Rainwater by Reverse Flow Injection Analysis Coupled to a Long Path Length Liquid Waveguide Capillary Cell and Spectrophotometric Detection

High-performance Liquid Chromatographic Method for the Determination of Ultratrace Amounts of Iron(ii) in Aerosols, Rainwater, and Seawater

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

A Sensitive Fluorescence Quenching Method For The Determination Of Iron(Ii) With 1,10-Phenanthroline

Highly Sensitive Determination of Iron Ions in Water with Bromopyrogallol Red by Light Absorption Ratio Variation Spectrophotometry

Rapid determination of Fe,Ni,Mn,Cu,Zn,Pb in seawater by co-precipitation-centrifuge-X-ray fluorescence spectrometer

An Expeditious and Sensitive Microprecipitation Approach Using Chrome Azurol S and Cetyltrimethylammonium Bromide for Visual Detection of Fe(II) and Fe(III) in Water

Redox Speciation Analysis of Dissolved Iron in Estuarine and Coastal Waters with On-Line Solid Phase Extraction and Graphite Furnace Atomic Absorption Spectrometry Detection.

Determination of Total Iron Ion by FIA-TPTZ Spectrophotometry

STUDY ON THE FI-PHOTOMETRIC DETERMINATION OF TRACE AMOUNTS OF IRON WITH IN-LINE OPEN-CAPILLARY PRECONCENTRATION

Cloud Point Extraction and Flame Atomic Absorption Spectrometric Determination of Trace Iron in Water Samples

Direct, Sensitive Determination of Trace Amounts of Dissolved Ferric Iron in Natural Water by Light Absorption Ratio Variation Spectrometry.

Membrane preconcentration of iron in seawater samples and on-site determination in spectrophotometry

Fluorescence quenching determination of iron(iii) using rhodamine 6G hydrazide derivative

Reverse Flow Injection Analysis Method for Catalytic Spectrophotometric Determination of Iron in Estuarine and Coastal Waters: A Comparison with Normal Flow Injection Analysis