Abstract:Combining the surface modification with bulk doping by ZnO, the co-modification strategy was applied to improve the structural stabilities and electrochemical properties of the layered Ni-rich LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials. The spherical morphology with a surface coating layer and evenly distributed Ni, Co, Mn, and Zn elements for the co-modified samples were demonstrated by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, together with the corresponding elemental mapping. Although the Ni2+ was increased near the surface, according to the X-ray photoelectron spectroscopy (XPS) results, the Li+/Ni2+ cation mixing remained constant based on the Rietveld refinement results. The electrochemical demonstrated its superior capacity retention with respect to the unmodified sample, especially in the first 300 cycles. Meanwhile, the co-modified sample also exhibited slower discharge voltage decay with inhibited electrode polarization, as well as lower interfacial resistances and faster Li-ions diffusion kinetics after 200 cycles in comparison with the pristine sample. The structure and morphology analysis results of the cycled electrodes revealed that the co-modified strategy of ZnO efficiently alleviates the structural pulverization of the spherical particles and successfully avoids the irreversible phase transformation towards the rock-salt phase. These results confirmed that the co-modified strategy of Zn2+ bulk doping and ZnO surface coating is highly conducive to the improvement of structural stabilities and electrochemical properties of the layered LiNi0 · 8Co0 · 1Mn0 · 1O2 cathode materials.

Stability and Electrochemical Performance of NiO Cathode Modified by ZnO Additive for MCFC in Molten Carbonates

Stability of Nio Cathode Modified by Zno Additive for Molten Carbonate Fuel Cell

Study Of Nio Cathode Modified By Zno Additive For Mcfc

A Novel Modified Nio Cathode for Molten Carbonate Fuel Cells

Electrochemical Characterization of La0.8Sr0.2MnO3-coated NiO As Cathodes for Molten Carbonate Fuel Cells

Effect of ZnO modification on the performance of LiNi0.5Co0.25Mn0.25O2 cathode material

Electrochemical Performance of Y2O3/NiO Cathode in the Molten Li0.62/K0.38 Carbonates Eutectics

Study of Lifeo2 Coated Nio As Cathodes for Mcfc by Electrochemical Impedance Spectroscopy

Chemical Cross‐linked Electrode–Electrolyte Interface Boosting the Structural Integrity of High Nickel Cathode Materials

High Performance Transition Metal Oxide Composite Cathode for Low Temperature Solid Oxide Fuel Cells

An Interfacial Mechanism of Chelate-Borate Electrolyte Additives in Ni-Rich LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Electrochemical Performances of Ni-Coated ZnO As an Anode Material for Lithium-Ion Batteries

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi0.8Co0.1Mn0.1O2 Cathode

A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Stabilizing LiNi0.8Co0.1Mn0.1O2 cathode by combined moisture and HF digestion/adsorption for high-performance lithium metal batteries

Suppressing irreversible phase transition and enhancing electrochemical performance of Ni-rich layered cathode LiNi0.9Co0.05Mn0.05O2 by fluorine substitution

Ni-doping optimized d-band center in bifunctional Fe2O3 modified by bamboo-like NCNTs as a cathode material for Zn-air batteries

Chemical Modification of Nickel-Rich Layered Cathode Materials to Improve Battery Life