Abstract:Complementary resistive switching (CRS) in single devices without internal electrodes is attractive in high-density memory applications because it simplifies fabrication and avoids the complicated controlling and matching needed when using two resistive switching (RS) devices, as in conventional CRS devices. To improve the performance of such devices, however, the CRS mechanism must be understood further. Here, the authors report on voltage-amplitude-controlled CRS and self-compliance opposite-polarity bipolar RS in Pt/HfO2/HfOx/Pt memory devices. In these devices, CRS showed an almost symmetrical current-voltage hysteresis loop. Both the set voltages and hopping conduction mechanism of the high resistance states in both the bipolar RS were consistent with those of the CRS. An excess current beyond Ohmic conduction appeared before the reset switching in the bipolar RS. To interpret the characteristics of the CRS and bipolar RS, the authors propose a slender conductive filament model. According to this model, a limited oxygen vacancy (V-o) source, high Vo diffusion barrier, small film thickness, and concentrated electric field all contribute to the formation of slender filaments and to CRS operations. The model also suggests that a slender filament might form in a layer of multilayer junctions, which allows for different layers to play specific roles and improve device performance. (C) 2017 American Vacuum Society.

Complementary Resistive Switching Behavior for Conductive Bridge Random Access Memory

Complementary Resistive Switching Behavior Induced by Varying Forming Current Compliance in Resistance Random Access Memory

Resistive Switching Characteristic of Cu Electrode-Based RRAM Device

Complementary Switching in 3D Resistive Memory Array

Multi-mode Resistive Switching Behaviors Induced by Modifying Ti Interlayer Thickness and Operation Scheme

Study of the Resistive Switching Characteristics and Mechanisms of Pt/CeOx/TiN Structure for RRAM Applications

Interface Engineering Via MoS2 Insertion Layer for Improving Resistive Switching of Conductive‐Bridging Random Access Memory

Design and Demonstration of Cu/Al2O3/Cu RRAM with Complementary Resistance Switching Characteristic

Existence of Bipolar Resistive Switching with Self-Rectifying Behavior in a P-Cucro2/n-si Heterostructure

Study on Resistive Switching Characteristics and Mechanisms of Cu/SiOx/TiN Structure Resistive Random Access Memory

Complementary Resistive Switching Behaviors Evolved from Bipolar Tin/Hfo2/Pt Device

Voltage-amplitude-controlled Complementary and Self-Compliance Bipolar Resistive Switching of Slender Filaments in Pt/HfO2/HfOx/Pt Memory Devices

Dynamic Evolution Process from Bipolar to Complementary Resistive Switching in Non-Inert Electrode RRAM

Understanding the Complementary Resistive Switching in Egg Albumen-Based Single Sandwich Structure with Non-Inert Al Electrode

Two-Dimensional (2D) Materials-Inserted Conductive Bridge Random Access Memory: Controllable Injection of Cations in Vertical Stacking Alignment of MoSe 2 Layers Prepared by Plasma-Assisted Chemical Vapor Reaction

Oxygen-ion-migration-modulated Bipolar Resistive Switching and Complementary Resistive Switching in Tungsten/indium Tin Oxide/gold Memory Device

Charge Transport and Bipolar Switching Mechanism in a Cu/HfO 2 /pt Resistive Switching Cell

Physics-based Modeling and Simulation of Conductive-Bridge Random Access Memory (CBRAM)

Self- Compliance Unipolar Resistive Switching and Mechanism of Cu/SiO2/TiN RRAM Devices

Bipolar and Complementary Resistive Switching Characteristics and Neuromorphic System Simulation in a Pt/ZnO/TiN Synaptic Device

Complementary Resistive Switching in Tantalum Oxide-Based Resistive Memory Devices