Abstract:Ti3Al intermetallic compounds is a lightweight, high-temperature resistant rare aerospace materials, whose dynamic mechanical properties concern the accuracy of simulation analysis and further development in material manufacturing. To obtain the plastic constitutive relation of Ti3Al under the action of mechanical-thermal coupling, material rheological behavior was investigated by using the separation Hopkinson pressure bar (SHPB) system with a high-temperature synchronous assembly. Meanwhile, the Johnson-Cook plastic constitutive model was calculated and modified by introducing strain compensation and adiabatic temperature rise at the range of strain rate of 0.001–6500 s−1 and deformation temperature of 293–1173 K. Furthermore, the microstructure evolution of Ti3Al fracture surface morphology was discussed. Experimental results showed that the flow stress had a weak positive strain rate enhancement effect, significant negative temperature thermal softening effect and strain rate plasticizing effect. Adiabatic temperature rise was accompanied by the high strain rate, and its value increased exponentially with the strain rate. The adiabatic deformed shear band (ADSB) appeared at an edge of 45° along the loading direction at the strain rate 4500 s−1 and the deformation temperature 273 K, respectively. ADSB tended to expand internally along with the strain rate and evolved into an adiabatic transformed shear band (ATSB) when the temperature rose to 973 K. The maximum relative errors in the modified J-C model at the high strain rate and the room temperature, the high strain rate and the high temperature were 3.11% and 14.91%, respectively. Consequently, the modified J-C model described in dynamic mechanical properties of Ti3Al was more accurate than the conventional J-C model.

Numerical Simulation of Extrusion of High Energy Milled Ti/Al Powders

NUMERICAL SIMULATION OF EXTRUSION OF COMPOSITE POWDERS PREPARED BY HIGH ENERGY MILLING

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Investigation on the Influence of Mechanical Milling on Microstructure and Thermostability of Ti/Al Mixed Powders

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Establishment of constitutive models and numerical simulation of dry pressing and solid state sintering processes of MgTiO3 ceramic

Numerical Simulation of Coupled Thermo-Mechanical Behavior of Ti-15-3 Alloy During Back-Extrusion

Numerical Simulation of Canned Hot-Extrusion Process of Mo Powder

Numerical Simulation and Experimental Research of the Hydrostatic Extrusion Process of Pure Tungsten

Finite Element Analysis of Densification Process in High Velocity Compaction of Iron-Based Powder

Effect of mechanical milling on diffusive reaction of Ti-Al composite powders

The numerical simulation of powder canning hot extrusion of W-40Cu alloy

An Effective Simulation Method for Aluminum Profile Extrusion Process

FEM and FVM Compound Numerical Simulation of Aluminum Extrusion Processes

Review of Numerical Simulation for Extrusion Process of Aluminum Alloy Profile

Research on Dynamic Mechanical Properties and Plastic Constitutive Relation of Ti3Al Intermetallic Compounds under Mechanical-Thermal Coupling

Manufaturing of Composite Powders with Ti/Al Lamellar Microstructure by Intensively Plastic Deformation

Finite Element Simulation of Extrusion Process of TC4 Titanium Alloy Profile