Abstract:For cable bridges, the cable tension force plays a crucial role in their construction, assessment and long-term structural health monitoring. Cable tension forces vary in real time with the change of the moving vehicle loads and environmental effects, and this continual variation in tension force may cause fatigue damage of a cable. Traditional vibration-based cable tension force estimation methods can only obtain the time-averaged cable tension force and not the instantaneous force. This paper proposes a new approach to identify the time-varying cable tension forces of bridges based on an adaptive sparse time-frequency analysis method. This is a recently developed method to estimate the instantaneous frequency by looking for the sparsest time-frequency representation of the signal within the largest possible time-frequency dictionary (i.e. set of expansion functions). In the proposed approach, first, the time-varying modal frequencies are identified from acceleration measurements on the cable, then, the time-varying cable tension is obtained from the relation between this force and the identified frequencies. By considering the integer ratios of the different modal frequencies to the fundamental frequency of the cable, the proposed algorithm is further improved to increase its robustness to measurement noise. A cable experiment is implemented to illustrate the validity of the proposed method. For comparison, the Hilbert-Huang transform is also employed to identify the time-varying frequencies, which are then used to calculate the time-varying cable-tension force. The results show that the adaptive sparse time-frequency analysis method produces more accurate estimates of the time-varying cable tension forces than the Hilbert-Huang transform method. Copyright (C) 2016 John Wiley & Sons, Ltd.

Cable Force Measurement Based on Vibration Frequency Method and Optimization Function

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Application of Wireless Cable Force Measurement System of Cable Structures

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Measuring Methods of Cable Tension in Cable-Stayed Bridges

COMPARATIVE ANALYSIS OF MEASURING METHODS OF CABLE TENSION FORCES IN CABLE-STAYED BRIDGES

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Design and Experimental Investigations of a Vibration Based Wireless Measurement System for Bridge Cable Tension Monitoring

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Evaluation of Cable Tension Forces Using Vibration Method for a Cable-stayed Bridge under Construction

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Joint Identification of Cable Force and Bending Stiffness Using Vehicle-Induced Cable–Beam Vibration Responses

Comparative Field Study of Cable Tension Measurement for a Cable-Stayed Bridge