Abstract:As light and efficient large-span space structures, beam string structures have been widely used since the 1980s. Within them, cables are the main force-bearing component; their level of tension determines the overall stiffness, performance and structural safety of the beam string structures. Real-time monitoring of the cable force during the construction and service periods is an important and effective measure to ensure the safety of the cable structure. At present, the vibration method is widely used in nearly all common engineering practices for cable force identification/monitoring because of its simplicity and efficiency. However, the vibration of the cable segment will be affected by the whole structure, so the cable force-frequency relationship based on the simple single cable model cannot meet the accuracy requirement of cable force identification of the beam string structure. Therefore, in this paper, through finite element simulation and theoretical analysis, a three-stage criterion is proposed to develop a new method for obtaining the local modal information of the tensioned cable segment where the influence of the overall structure is considered. The new method’s performance was compared with the results obtained by the vibration method according to the single-cable model assumption, and the design values of the cable forces. The magnitude of the error in the identification of the tension force of the beam string structure according to the single-cable model was studied to provide a correction method, so that the single-cable model assumption can be used to improve the measuring efficiency and ensure the solution accuracy. The numerical results show the effectiveness of the proposed method. The work of this paper provides a new approach for improving the identification accuracy of the vibration method of a complex cable system such as the beam string structure and is a useful discussion on the vibration method of complex cable systems.

Joint Identification of Cable Force and Bending Stiffness Using Vehicle-Induced Cable–Beam Vibration Responses

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

Estimation of damping matrices of cable-stayed bridges based on known data of modal damping

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Multiparameter Identification of Bridge Cables Using XGBoost Algorithm

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Vibration-Based Damage Detection Of Cable-Stayed Bridges

In-plane free vibrations of small-sag inclined cables considering bending stiffness with applications to cable tension identification

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Contact Stiffness Identification Method for Joint Surface and the Effect of Contact Stiffness on the Dynamic Response of the Cable Bracket

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures

Research on the Dynamic Characteristics of Cables Considering the Constraints at Both Ends of the Cables

An Improved Static Residual Force Algorithm and Its Application in Cable Damage Identification for Cable-Stayed Bridges

Condition Assessment of Grouped Cable Forces of Cable-Stayed Bridge Using Deflection Data

Effect of Bending Stiffness on the In-Plane Free Vibration Characteristics of a Cable Network