Abstract:In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis.

On-line measurement of extension errors of legs for 6-sps Stewart in-parallel machine

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Six-axis Force/Torque Sensor Based on Stewart Platform

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Local Calibration of a Weak Stiffness On-Machine Measuring Device with a New 3-D Calibrator

Study on Calibration Method and System Error Compensation of Balancing Machines

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Kinematic Calibration of Stewart Mechanism Based on Generalized Force Principle

Calibration of Stewart Platforms Using a Coordinate Measuring Machine

Experimental Analysis on the Effectiveness of Kinematic Error Compensation Methods for Serial Industrial Robots

Design and calibration of the 6-DOF motion tracking system integrated on the Stewart parallel manipulator

Precision Analysis of 6D Measurements of a Rigid Body Based on the Stewart Platform

The Device for Calibration Based on the Six-freedom of Generalized Force

Full-scale Measurement of CNC Machine Tools

Saddle Point Programming Based Level-Posture Evaluation Method for Aircraft Wings

Pose Error Modeling And Analysis For 6-Dof Stewart Platform