Abstract:The primary goal of this study was to investigate the monotonic tensile behavior of high-density polyethylene (HDPE) in its virgin, regrind, and laminated forms. HDPE is the most commonly used polymer in many industries. A variety of tensile tests were performed using plate-type specimens made of rectangular plaques. Several factors can affect the tensile behavior such as thickness, processing technique, temperature, and strain rate. Testing temperatures were chosen at −40, 23 (room temperature, RT), 53, and 82 °C to investigate temperature effect. Tensile properties, including elastic modulus, yield strength, and ultimate tensile strength, were obtained for all conditions. Tensile properties significantly reduced by increasing temperature while elastic modulus and ultimate tensile strength linearly increased at higher strain rates. A significant effect of thickness on tensile properties was observed for injection molding specimens at 23 °C, but no thickness effect was observed for compression molded specimens at either 23 or 82 °C. The aforementioned effects and discussion of their influence on tensile properties are presented in this paper. Polynomial relations for tensile properties, including elastic modulus, yield strength, and ultimate tensile strength, were developed as functions of temperature and strain rate. Such relations can be used to estimate tensile properties of HDPE as a function of temperature and/or strain rate for application in designing parts with this material.

Thermogravimetry Study of the Thermal Stability and the Lifetime of High Density Polyethylene Film

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Solubility Measurement Of Hydrogen, Ethylene, And 1-Hexene In Polyethylene Films Through An Intelligent Gravimetric Analyzer

Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene

A Study of the Degradation of Polyethylene by High‐temperature Dynamic Light‐scattering

Non-isothermal Decomposition Kinetics and Lifetime of Polyoxypropylene Ether

Effects of thermo-oxidative aging on chain mobility, phase composition, and mechanical behavior of high-density polyethylene

PE/PE‐g‐MAH/Org‐MMT Nanocomposites. II. Nonisothermal Crystallization Kinetics

Tensile Behavior of High-Density Polyethylene Including the Effects of Processing Technique, Thickness, Temperature, and Strain Rate

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Thermal oxidation products and kinetics of polyethylene composites

FT-IR Studies of Factors Affecting the Diffusivity of Oligo (oxyethylene) Fatty Acid Ester in PE Films: Effect of Temperature, Ethylene Oxide Chain Length and Base Resin Type

Hierarchical structure and properties of high‐density polyethylene (HDPE) microporous films fabricated via thermally‐induced phase separation (TIPS): Effect of presence of ultra‐high molecular weight polyethylene (UHMWPE)

High-Density Polyethylene Degradation into Low Molecular Weight Gases at 1823 K: An Atomistic Simulation

Dynamic Rheological Properties for HDPE/CB Composite Melts

Thermal Degradation Kinetics of Halogen-Free Flame-Retarded Polyethylene Composites

Thermal Degradation Kinetics of Ethylene-Vinyl Acetate Copolymer Containing Hydrotalcite and Red Phosphorus

Influence of Discharges and UV Irradiation on the Electrical Properties of High Pressure Polyethylene and Compositions on Its Base

Study on the Co-Pyrolysis of High Density Polyethylene and Potato Blends Using Thermogravimetric Analyzer and Tubular Furnace

Investigation of Tensile Creep Behavior for High-Density Polyethylene (HDPE) via Experiments and Mathematical Model

Structure and Properties of Ultraviolet‐irradiated High Density Polyethylene at Different Environmental Temperatures