Abstract:BACKGROUND: Greatly higher elastic modulus of traditional metal prosthesis than bone elastic modulus is mechanical factor for aseptic loosening of artificial joint, resulting in stress shielding, bone resorption and bone atrophy. OBJECTIVE: To measure femoral stress after prosthetic replacement made of carbon fiber reinforced poly-ether-ether-ketone (CF/PEEK), and compare with domestic AML prosthesis, so as to explore the application prospect of compound material in total hip femoral head prosthesis. DESIGN, TIME AND SETTING: Comparative analysis was performed at Orthopedics Laboratory, First Hospital of Soochow University and Institute of Biomechanical Engineering of Shanghai University from September 2002 to March 2004. MATERIALS: CF/PEEK prosthesis was designed by the authors, composed of long CF/PEEK compound material as inner layer, 100 Gpa and short CF/PEEK compound material as outer layer, 20 Gpa; the layer intensity at stress center was strengthened, and the appearance and size of the CF/PEEK prosthesis simulated domestic AML cobalt alloy prosthesis (Beijing Huajiehao Company). Five pairs (10 femurs) of femurs were from fresh adult cadavers. METHODS: Five pairs of human cadaveric femora were divided equally into left and right groups: one group received a cobalt-chrome molybdenum alloy (CoCrMo) implant and the other received CF/PEEK implant. Strain-gauge rosettes were attached to external surface of each implant and proximal femora. The loading condition simulated single-limb stance. MAIN OUTCOME MEASURES: strains distribution on the normal femur and femoral surface after replacement with two kinds of prostheses; shearing strain at femur-prosthesis interface of two groups. RESULTS: Following prosthesis implantation, the strains exhibited a progressive proximal-to-distal increase, which was similar to that in the intact femur, and the strain was maximum near the distal prosthesis. The strains on the medial and lateral surface of the femur were reduced after implantation of both types of implants. The pattern and magnitude of the strains, however, were closer to those in the intact femur after insertion of CF/PEEK prosthesis than in the CoCrMo one. CONCLUSION: Mechanical performance of CF/PEEK compound prosthesis is similar to bone tissue, and can provide similar strain under loading condition. Therefore, it can provide immediate postoperative stability and proximal loading transfer.

Carbon Fiber Composite for Acetabular Prosthesis-Fabrication,Wear and Biocompatibility

CFPEEK Composite Materials for Hip Prosthesis:Fabrication, Wear and Biological Fixation

Short carbon fiber reinforced polyetgeretherketone for hip prosthesis: Biocompatibility and biomechanics

Mechanical Performance of Proximal Human Femur after Poly-Ether-ether-ketone Femoral Prosthesis Implantation

Fretting Wear Study of PEEK-Based Composites for Bio-implant Application

Carbon fiber reinforced PEEK Optima--a composite material biomechanical properties and wear/debris characteristics of CF-PEEK composites for orthopedic trauma implants

Tribological Properties of Ultra-high-molecular-weight-polyethylene Composites Reinforced with Carbon Fiber

Formulation and selection of composite biomaterials for acetabular cup of hip prosthesis with wear analysis

Biological tribology properties of the modified polyether ether ketone composite materials

Friction and Wear Properties of UHMWPE Composites Reinforced with Carbon Fiber

Strain distribution in the proximal human femur after insertion of CF/PEEK femoral stems

Biotribology Behavior of Ultra-High Molecular Weight Polyethylene Against Carbon/Carbon Composites Used for Hip Joint Replacement

Wettability and Frictional Studies of PEEK Composites against Co-Cr Alloys with Surface Textures

Observation of Bioeffects of Wear Debris of Carbon Fiber Composite Materials

Study and numerical analysis of Von Mises stress of a new tumor-type distal femoral prosthesis comprising a peek composite reinforced with carbon fibers: finite element analysis

Mechanical Properties and Cytotoxicity of Hierarchical Carbon Fiber-Reinforced Poly (Ether-Ether-ketone) Composites Used As Implant Materials.

Effects of Surface Oxidation Treatment of Carbon Fibers on Biotribological Properties of Cf/Peek Materials

Polyether-ether-ketone/poly(methyl Methacrylate)/carbon Fiber Ternary Composites Prepared by Electrospinning and Hot Pressing for Bone Implant Applications

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Mechanical properties, hemocompatibility, cytotoxicity and systemic toxicity of carbon fibers/poly(ether-ether-ketone) composites with different fiber lengths as orthopedic implants.

Preparation and Properties of the Poly(ether Ether Ketone) (Peek)/nano-Zinc Oxide (zno)–short Carbon Fiber (SCF) Artificial Joint Composites