Abstract:BACKGROUND: Greatly higher elastic modulus of traditional metal prosthesis than bone elastic modulus is mechanical factor for aseptic loosening of artificial joint, resulting in stress shielding, bone resorption and bone atrophy. OBJECTIVE: To measure femoral stress after prosthetic replacement made of carbon fiber reinforced poly-ether-ether-ketone (CF/PEEK), and compare with domestic AML prosthesis, so as to explore the application prospect of compound material in total hip femoral head prosthesis. DESIGN, TIME AND SETTING: Comparative analysis was performed at Orthopedics Laboratory, First Hospital of Soochow University and Institute of Biomechanical Engineering of Shanghai University from September 2002 to March 2004. MATERIALS: CF/PEEK prosthesis was designed by the authors, composed of long CF/PEEK compound material as inner layer, 100 Gpa and short CF/PEEK compound material as outer layer, 20 Gpa; the layer intensity at stress center was strengthened, and the appearance and size of the CF/PEEK prosthesis simulated domestic AML cobalt alloy prosthesis (Beijing Huajiehao Company). Five pairs (10 femurs) of femurs were from fresh adult cadavers. METHODS: Five pairs of human cadaveric femora were divided equally into left and right groups: one group received a cobalt-chrome molybdenum alloy (CoCrMo) implant and the other received CF/PEEK implant. Strain-gauge rosettes were attached to external surface of each implant and proximal femora. The loading condition simulated single-limb stance. MAIN OUTCOME MEASURES: strains distribution on the normal femur and femoral surface after replacement with two kinds of prostheses; shearing strain at femur-prosthesis interface of two groups. RESULTS: Following prosthesis implantation, the strains exhibited a progressive proximal-to-distal increase, which was similar to that in the intact femur, and the strain was maximum near the distal prosthesis. The strains on the medial and lateral surface of the femur were reduced after implantation of both types of implants. The pattern and magnitude of the strains, however, were closer to those in the intact femur after insertion of CF/PEEK prosthesis than in the CoCrMo one. CONCLUSION: Mechanical performance of CF/PEEK compound prosthesis is similar to bone tissue, and can provide similar strain under loading condition. Therefore, it can provide immediate postoperative stability and proximal loading transfer.

Mechanical properties, hemocompatibility, cytotoxicity and systemic toxicity of carbon fibers/poly(ether-ether-ketone) composites with different fiber lengths as orthopedic implants.

Mechanical Properties and Cytotoxicity of Hierarchical Carbon Fiber-Reinforced Poly (Ether-Ether-ketone) Composites Used As Implant Materials.

Preparation of Three-Dimensional Braided Carbon Fiber-Reinforced PEEK Composites for Potential Load-Bearing Bone Fixations. Part I. Mechanical Properties and Cytocompatibility

The Influence of Long Carbon Fiber and Its Orientation on the Properties of Three-Dimensional Needle-Punched CF/PEEK Composites

Polyether-ether-ketone/poly(methyl Methacrylate)/carbon Fiber Ternary Composites Prepared by Electrospinning and Hot Pressing for Bone Implant Applications

Short carbon fiber reinforced polyetgeretherketone for hip prosthesis: Biocompatibility and biomechanics

Biological tribology properties of the modified polyether ether ketone composite materials

Evaluation of polyetheretherketone composites modified by calcium silicate and carbon nanotubes for bone regeneration: mechanical properties, biomineralization and induction of osteoblasts

Mechanical Performance of Proximal Human Femur after Poly-Ether-ether-ketone Femoral Prosthesis Implantation

CFPEEK Composite Materials for Hip Prosthesis:Fabrication, Wear and Biological Fixation

Carbon fiber reinforced PEEK Optima--a composite material biomechanical properties and wear/debris characteristics of CF-PEEK composites for orthopedic trauma implants

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

State‐of‐the‐art review on the high‐performance poly (ether ether ketone) composites for mechanical, tribological and bioactive characteristics

Fabrication and Mechanical Properties of Different Types of Carbon Fiber Reinforced Polyetheretherketone: A Comparative Study.

Application of Polyetheretherketone in the Orthopedic Implants

Enhanced bioactivity and osteogenic property of carbon fiber reinforced polyetheretherketone composites modified with amino groups

High-strength carbon fiber-reinforced polyether-ether-ketone composites with longer fiber retention length manufactured via screw extrusion-based 3D printing

A New Strategy for PEEK-based Biocomposites to Achieve Porous Surface for Bioactivity and Adjustable Mechanical Properties for Orthopedic Stress Matching

Mechanical and Thermal Properties and Cytotoxicity of Al2O3 Nano Particle-Reinforced Poly(ether-Ether-ketone) for Bone Implants

Performance of 3D printed porous polyetheretherketone composite scaffolds combined with nano-hydroxyapatite/carbon fiber in bone tissue engineering: a biological evaluation

Exploring Advanced Functionalities of Carbon Fiber-Graded PEEK Composites as Bone Fixation Plates Using Finite Element Analysis