Abstract:Although the time-to-digital converters (TDCs) implemented on field programmable gate arrays (FPGAs) have achieved considerably high measurement resolution and precision in recent years, achieving zero measurement dead time is still a challenge for some applications. The goal of this paper is to design a FPGA-based TDC with zero measurement dead time without compromising other performance. Based on the conventional tapped delay line (TDL) TDC structure, the idea of our method is to enable the continuous flow of trigger signals onto the TDL and propose a powerful encoder with capability of recognizing all trigger edges within a system clock period. Considering the inherent “bubble” problem in the TDL, the latched TDL status is first decomposed into sixteen divisions, all of which identify all the trigger edges in parallel. Through a specific coincident mechanism, the trigger edges on all the divisions are matched and their positions on the TDL are encoded for output. To overcome the significant integral nonlinearity (INL) error caused by large delay deviations of delay units, online calibration tables are established to convert the positions of trigger edges into fine timestamps, so that the original resolution and precision of the TDC can be maintained. The proposed TDC is implemented on a Xilinx Zynq UltraScale+ FPGA for performance evaluation. In addition to verifying the TDC function and online calibration tables, the TDC resolutions for the rising and falling edges are measured as 1.82 ps and 1.92 ps respectively. By inputting the trigger signals with a higher frequency than the TDC system clock, all the rising and falling edges of trigger signals are detected with the root mean square (RMS) measurement precisions ranging from 2 ps to 4.5 ps, which confirms the achievement of zero measurement dead time.

The Precise Digital Measurement of the Dead-Time for A Multichannel Analyzer

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

The Dead Time Characterization Method of Quartz Flexure Accelerometers Using Monotonicity Number

High-Resolution Multi-Channel Frequency Standard Comparator Using Digital Frequency Measurement

Algorithm based on TDC to estimate and calibrate delay between channels of high-speed data acquisition system

High Precision Measurement of Ultrasonic Wave Transmission Time

A Device for Measuring Propagation Time of Ultrasonic Wave

High-precision time measurement electronics using the bandpass sampling method

High-precision Microwave Photonic True Time Delay Measurement Based on Multi-Channel Microwave Interference

The influence of software timing error on measurement accuracy of data acquisition

Realization of Zero Measurement Dead Time on FPGA-based Time-to-Digital Converters

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

The Testing Method of Waveform Capture Rate for DSO

A High Precision Time Measurement Method Based on Phase-Fitting for Muon Detection

Robust Precise Time Difference Estimation Based on Digital Zero-Crossing Detection Algorithm

A relative frequency difference detection method based on TDC

Design of A High Performance Time-to-Digital Converter with Zero Dead Time on Xilinx FPGA

Time Measurement System Based on Waveform Digitization for Time-of-Flight Mass Spectrometer

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.