Abstract:The development of light-emitting diode (LED) technology has resulted in widespread solid state lighting (SSL) use in consumer and industrial applications. Previous researchers have shown that LEDs from the same manufacturer and operating under same use-condition may have significantly different degradation behavior. Applications of LEDs to safety critical and harsh environment applications necessitate the characterization of failure mechanisms and modes. This paper focuses on a prognostic health management (PHM) method based on the measurement of forward voltage and forward current of bare LED under harsh environment. In this paper, experiments have been done on single LEDs subjected to combined temperature–humidity environment of 85 °C, 85% relative humidity. Pulse width modulation (PWM) control method has been employed to drive the bare LED in order to reduce the heat effect caused by forward current and high frequency (300 Hz). A data acquisition system has been used to measure the peak forward voltage and forward current. Test to failure (luminous flux drops to 70%) data has been measured to study the effects of high temperature and humid environment loadings on the bare LEDs. A solid state cooling method with a Peltier cooler has been used to control the temperature of the LED in the integrating sphere when taking the measurement of luminous flux. The shift of forward voltage forward current curve and lumen degradation has been recorded to help build the failure model and predict the remaining useful life (RUL). Particle filter has been employed to assess the RUL of the bare LED. Model predictions of RUL have been correlated with experimental data. Results show that prediction of RUL of LEDs, made by the particle filter model, works with acceptable error-bounds. The presented method can be employed to predict the failure of LED caused by thermal and humid stresses.

Lumen Decay Prediction in LED Lamps

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

Prediction of Operational Lifetime of Perovskite Light Emitting Diodes by Machine Learning

Luminous Efficiency of Ripple Current Power Driving High Power LED

Research on Lumen Depreciation Related to LED Packages by In-Situ Measurement Method

Prognostics of Radiation Power Degradation Lifetime for Ultraviolet Light-Emitting Diodes Using Stochastic Data-Driven Models

An Analytical And Machine Learning Model For Spd Estimation And Its Prediction For Lumen And Chromaticity Shift Based Led Lifetime Performance Analysis

Extrapolated lifetime prediction of light-emitting diode lights based on equivalent average luminance and accelerated degradation tests

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Converter-level FEM Simulation for Lifetime Prediction of an LED Driver with Improved Thermal Modelling.

Luminance degradation test and life prediction of LED light at conventional stress using TPWRAM

Reliability Evaluation of LED Lamp Beads Considering Multi-Stage Wiener Degradation Process Under Generalized Coupled Accelerated Stress

Analysis of the Degradation of High Power Light Emitting Diode

A Weibull–lognormal-based life prediction model for LED light with four groups of ADTs

A fluorescent lamp model based on its physical characteristics

Temperature Estimation of High-Power Light Emitting Diode Street Lamp by a Multi-Chip Analytical Solution

A New Tolerance Design Method for Led Lamp Driver with Performance Degradation Model

On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters During Led Accelerated Life Testing