Abstract:The effect of nozzle surface features on the overall atomization behavior of a liquid jet is analyzed in the present computational work by adopting three representative geometries, namely a single X-ray tomography scan of the Engine Combustion Network’s Spray A nozzle (Unprocessed), a spline reconstruction of multiple scans (Educated), and a purely external flow configuration. The latter configuration is often used in fundamental jet atomization studies. Numerically, the two-phase flow is solved based on algebraic volume-of-fluid methodology utilizing the OpenFoam solver, interFoam. Quantitative characterization of the surface features concerning the first two geometries reveals that while both of them have similar levels of cylindrical asymmetries, the nozzle configuration pertaining to the Unprocessed geometry has much larger surface features along the streamwise direction than the Educated geometry. This produces for the Unprocessed configuration a much larger degree of non-axial velocity components in the flow exiting the orifice and also a more pronounced disturbance of the liquid surface in the first few diameters downstream of the nozzle orifice. Furthermore, this heightened level of surface destabilization generates a much shorter intact liquid core length, that is, it produces faster primary atomization. The surprising aspect of this finding is that the differences between the Unprocessed and Educated geometries are of [Formula: see text](1) μm, and they are able to produce [Formula: see text](1) mm effects in the intact liquid core length. In spite of more pronounced atomization for the Unprocessed geometry, the magnitude of the turbulent liquid kinetic energy is roughly the same as the Educated geometry. This highlights the important role of mean field quantities, in particular, non-axial velocity components, in precipitating primary atomization. At the other end of the spectrum, the external-only configuration has the mildest level of surface disturbances in the near field resulting in the longest intact liquid core length.

CFD Simulation of Nozzle Characteristics in a Gas Aggregation Cluster Source

An Optical Imaging Method for Studying the Spatial Distribution of Argon Clusters

Quantification of particle clusters in particle-laden round jets

Numerical Simulation of Nanocluster Motion Through a DC Magnetron Nanocluster Source

CFD-DEM Simulation of Clustering Phenomena in Riser and Downer

An Experimental Investigation on the Performance of Conical Nozzles for Argon Cluster Formation in Supersonic Jets

Numerical Simulation of Turbulence Modulation by Cylindrical Particles in Round Jet

Effects of Coherent Structures on Nanoparticle Coagulation and Dispersion in a Round Jet

Numerical Simulation of Spray Flow Processes in Adjustable Centrifugal Nozzle

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Characterization of the Spatial Atomic Density Distribution in Gas Jets from Three Different Nozzles

Two Dimensional Simulation Of Velocity Field Of Two-Phase Flow For Gas And Solid In The Abrasive Air Jet Nozzle

Simulation study on ejection nozzle based on CFD orthogonal experiment

CFD simulation of gas-solid flow with a cluster structure-dependent drag coefficient model in circulating fluidized beds

Re-investigation on effect of equivalent diameter of the conical nozzle on cluster size

The effect of nozzle internal flow on spray atomization

Investigation of Effect of Nozzle Geometry on Spray Characteristics with a 3D Eulerian Spray Model Coupled with the Nozzle Cavitating Flow

A Computational Fluid Dynamics (CFD) Investigation of the Flow Field and the Primary Atomization of the Close Coupled Atomizer

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle

Flow Behavior of Clusters in a Riser Simulated by Direct Simulation Monte Carlo Method

Numerical study of particle behavior in laminar axisymmetric opposed-jet flows