Abstract:Coaxial powder feeding technology in the field of metal additive manufacturing is booming. In this paper, a new laser cladding nozzle with powder feeding channels of inner and outer rings is designed. The nozzle works with a new kind of laser, which is a new heat source with an inner beam and outer beams. The water-cooling channels are simulated in Ansys Workbench. The simulation results present the temperature distribution of the working nozzle and the velocity of the cooling water. The thermal dilation of the nozzle in the working environment is also simulated. The results show that the loop water cooling channel could effectively reduce the high temperature of the nozzle down to about 200 °C. In addition, it could well restrain the thermal deformation of the nozzle lower to 0.35 mm. The equivalent stress of most parts is controlled under 360 MPa. Then, the powder flows of the inner and outer rings of the multiple powder feeding channels are simulated in Ansys Fluent. The convergence effect of the powder flow could be assumed and some significant parameters, such as the velocity, are acquired. The results present that these multiple powder feeding channels could realize the generation and removal of removable supports of workpieces with highly complex shapes and achieve a large processing range and good processing efficiency. The velocity of the powder flow at the outlet is elevated to about 5 mm/s. Then, the thermal cladding states under the new laser heat source of the powder are simulated in Workbench. The temperature of the melting process and the thermal deformation and the equivalent stress/strain of the additive parts are obtained in the emulation. The results emerge that the powder melting range and the ascending temperature of the melting pool are improved with this effect. The greatest temperature of the melting pool is about 2900 °C in the machining process, and the maximum thermal equivalent stress is 1.1407 × 1010 Pa.

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle

Simulation and Experimental Research Based on Carrier Gas Flow Rate on the Influence of Four-Channel Coaxial Nozzle Flow Field

Numerical Study on Powder Stream Characteristics of Coaxial Laser Metal Deposition Nozzle

Numerical Research of High Viscosity Phosphor Flow Field Distribution of High-Power LED Phosphor Coating Process

Powder flow simulation of a ring-type coaxial nozzle and cladding experiment in laser metal deposition

Simulation and Optimal Control of Fluidized Bed Based Powder Feeder for Laser Remanufacturing

Coupling Characteristics of Powder and Laser of Coaxial Cone Nozzle for Laser Direct Metal Deposition: Numerical Simulation and Experimental Study

Design and Numerical Analysis of an Inside-Beam Powder Feeding Nozzle for Wide-Band Laser Cladding

Numerical modelling of suction filling using DEM/CFD

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Numerical study of swirl nozzle internal flow field : Launcher Technology

NUMERICAL INVESTIGATION OF HVAF-SPRAYED Fe-BASED AMORPHOUS COATINGS

Numerical and experimental investigation of close-coupled twin-nozzle gas atomization towards fine high-entropy alloy powder production

Numerical investigation on flow process of liquid metals in melt delivery nozzle during gas atomization process for fine metal powder production

Numerical Simulation of Turbulence Modulation by Cylindrical Particles in Round Jet

Prediction of deposit characteristics based on the discrete coaxial nozzle during laser direct metal deposition

Study of optimization features of gas-powder jets created by a coaxial nozzle with divided powder supply during direct laser deposition of materials

Optimal Design of a Cold Spray Nozzle for Inner Wall Coating Fabrication by Combining CFD Simulation and Neural Networks

Design a New Type of Laser Cladding Nozzle and Thermal Fluid Solid Multi-Field Simulation Analysis

3D numerical modeling of gas atomization process for powder preparation based on similarity theory

Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution