Abstract:Aiming at the problem of serious deviation from the actual energy consumption for the calculated energy consumption with the continuous operation mode prescribed in current design standard for residential building energy efficiency in hot summer and cold winter zone, a questionnaire survey for the use mode of air conditioner has been conducted in Hangzhou, a typical city in this climate zone. It was found that there widely exists intermittent energy consuming method in the residential buildings of this area. The air conditioning using behavior was affected by thermal feeling of human body. The greater the indoor air temperature deviates from the the human body comfort scope, the higher the air conditioning opening rate is. DeST was employed to calculate the annual energy consumption of the residential building with internal and external wall insulations under different occupant behaviors, and then the annual energy saving effects were analyzed. The results show that in continuous energy consuming method, the annual energy saving effect for external insulation is better than that for internal insulation;in intermittent energy consuming method without considering tolerate temperature, the annual energy saving effect for internal insulation is better than that for external insulation. Under the condition of variable tolerate temperature, the critical tolerate temperature point for internal and external insulation with the same energy saving effect is 31.8 ℃ in summer and 13.4 ℃ in winter. When tolerate temperature is lower than the critical point, the internal insulation has better energy saving effect; when tolerate temperature is higher than the critical point, the external insulation has better energy saving effect. The choice of reasonable insulation means in this region was greatly affected by the air?conditioning behaviors and occupants’ thermal tolerance. The critical tolerate temperature for the same energy saving of the internal and external insulations is 31.8℃ in summer and 13.4℃ in winter. Therefore, setting reasonable air?conditioning behavior in the design standard for energy efficiency is an important premise for accurately evaluating the energy saving effect of exterior wall insulation measures.

Technical Note on Effects of Different Climate Conditions on the Thermal Mass Walls in China

The Energy Saving Effect of Different Wall Insulation Configurations with the Intermittent and Compartmental Heating Method

Temporal variation of wall flow and its influences on energy balance of the building wall

Optimum Insulation Thickness of External Walls by Integrating Indoor Moisture Buffering Effect: a Case Study in the Hot-Summer-cold-winter Zone of China

Anti-insulation Behavior for Exterior Wall External Insulation on Residential Buildings in Hot Summer and Cold Winter Zone

Energy Efficiency For Airtightness And Exterior Wall Insulation Of Passive Houses In Hot Summer And Cold Winter Zone Of China

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Effect of Inhabitant Behavioral Responses on Adaptive Thermal Comfort under Hot Summer and Cold Winter Climate in China

The Influence of Wall Structures to Air Conditioner Energy Consumption Based on the Characteristics of Intermittent and Loculose Energy Use

Influence on energy saving effects of internal and external wall insulations for different occupant behaviors

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Effectiveness of the thermal mass of external walls on residential buildings for part-time part-space heating and cooling using the state-space method

Ideal Thermal Physical Properties of Building Wall in an Active Room

Exploring Building Component Thermal Storage Performance for Optimizing Indoor Thermal Environment – A Case Study in Beijing

Effects of thermal mass on transient thermal performance of concrete-based walls and energy consumption of an office building

Evaluation of the Summer Overheating Phenomenon in Reinforced Concrete and Cross Laminated Timber Residential Buildings in the Cold and Severe Cold Regions of China

Experimental study on the performance of a novel RC-PCM-wall

Thermal performance study of straw concrete external walls for rural residences in hot-summer and cold-winter zone of China

Experimental and numerical study on indoor thermal environment of solar Trombe walls with different air-channel thicknesses in plateau

New Concepts and Approach for Developing Energy Efficient Buildings: Ideal Specific Heat for Building Internal Thermal Mass