Planar Dual-Band Coupled-Line Absorptive Bandstop Filter With an Input Lossy Step-Impedance Stub
Xiaoying Zuo,Lei Qin,Mengxin He,Hang Mei,Yajian Li
DOI: https://doi.org/10.1016/j.aeue.2024.155133
IF: 3.169
2024-01-20
AEU - International Journal of Electronics and Communications
Abstract:In this article, a novel planar dual-band coupled-line absorptive bandstop filter (ABSF) is presented. The proposed structure consists of four pairs of couple-lines, a grounded step-impedance stub and a resistor R . The return loss is absorbed by resistor R effectively, while the step-impedance stub reduces the insertion loss in passbands caused by resistor R . This proposed bandstop filter has planar layout, free design parameters, high-selectivity dual-frequency bandstop function, and good absorptive character. A typical example is designed, simulated, and measured to verify the proposed structure. The measured results demonstrate that -10 dB rejection bandwidth is 30.42% (from 0.53 GHz to 0.71 GHz) in the first stopband and 13.87% (1.26 GHz to 1.44 GHz) in the second stopband, respectively. Stopband rejection is -40.45 dB at 1.33 GHz, and return loss S 11 is under -12.95 dB in whole working band. The Min. insertion loss reaches to 0.15 dB in passbands. The circuit size is 0.24λ 0 × 0.17λ 0 (72.5 mm × 51.0 mm). The proposed filter can be concurrently applied to select frequency and suppress return loss interference in wireless systems.
telecommunications,engineering, electrical & electronic