Abstract:Absorptive bandpass filters (ABPFs) are highly attractive in modern microwave communication systems due to their ability to internally absorb the harmful stopband RF-power reflections. This paper reports an approach to designing quasi-elliptic ABPFs with ultra-wide reflectionless range, enhanced selectivity, and compact size. The method is realized based on a fourth-order quasi-elliptic absorptive lowpass filter (ALPF) prototype with a simplified structure. This ALPF prototype exhibits both good impedance-matching over the whole normalized frequency domain and an adjustable transmission zero close to the passband. By applying an equivalent impedance transformer model, a coupled-line-based ABPF scheme is devised from the ALPF prototype, which eliminates conventional dispersive transmission line inverters, resulting in an ultra-wide reflectionless range and a compact size. Closed-form equations are derived to support the filter synthesis. A 2.45 GHz microstrip ABPF with 30% fractional bandwidth is designed for verification. The measured minimum in-band insertion loss is 0.83 dB and the reflectionless range of return loss better than 10 dB is from DC to 12.88 GHz. Both the upper and lower stopband suppression exceed 20 dB, with the upper stopband extending up to 6.80 GHz. The upper and lower out-of-band roll-off rates are 93.9 and 121.4 dB/GHz, respectively. The overall circuit size is 0.12 λg2.

Planar Dual-Band Coupled-Line Absorptive Bandstop Filter With an Input Lossy Step-Impedance Stub

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A planar three-section coupled-line high-selectivity wideband bandstop filter

Dual‐wideband Bandstop Filter Using Stepped Impedance Coupled‐lines

A compact all-frequency absorptive dual-band bandpass filter with T-shaped transmission line absorption branches

Design of the Microstrip Bandstop Filter With High Insertion Loss

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Bandstop Filter Using Coupled-Line Section

Microstrip Quasi-Elliptic Absorptive Bandpass Filter with Ultra-Wide Reflectionless Range and Compact Size

Compact Wideband Ltcc Bandstop Filter Using Vertical Coupled-Line Units

A Compact Wideband Bandpass Filter Based on Parallel-Coupled Stub-Loaded Resonator

Compact Dual-Band Bandpass Filter Using Stub-Loaded Stepped Impedance Resonators with Mixed Electric and Magnetic Couplings

Quasi-Elliptic Wideband Bandstop Filter Using Stepped-Impedance Coupled Line

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

Miniaturized Frequency Controllable Band-Stop Filter Using Coupled-Line Stub-Loaded Shorted SIR for Tri-Band Application

A dual-wideband bandpass filter with closely spaced passbands using coupled lines and shunt transmission lines loaded with end-connected coupled lines

A Novel Dual-Band Bnadstop Filter Based on Parallel Stub-Loaded Resonator

Compact dual-band bandpass filter using spiral resonators and short-circuited stub-loaded resonator

Compact Dual‐mode Bandpass Filter Using Slotline Resonator and Stubs

Bandpass Filters Using Stepped Coupled Lines with Super Wide Stopbands

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection