Abstract:Ultrasonic linear arrays have great potential to generate high-quality three-dimensional (3D) images by scanning the array. However, the generated images suffer from low resolution in the elevation plane, limiting the image quality for a reliable 3D Non-Destructive Testing (NDT) inspection. Although several ultrasonic imaging methods have been implemented to inspect different types of defects, there has been limited research to characterise surface-breaking cracks (SBCs) in 3D quantitatively. To improve the characterisation of surface-breaking cracks (SBCs), a 3D hybrid imaging method is proposed by combining the Half Skip Total Focusing Method (HSTFM) and the Synthetic Aperture Focusing Technique (SAFT) using a linear array. This paper proposed the implementation of an array with a reduced element length for full matrix capture (FMC) data acquisition. In conjunction with the hybrid imaging method, a reduced element array enables the utilisation of the information from a broad ultrasonic beam in the elevation direction to achieve improved image resolution. The imaging capability is assessed via a point spread function (PSF) as well as numerical simulations. From the PSF measurements, the image resolution is shown to improve with the smaller element length of the array, which is attributable to the combination of wide beamwidth and hybrid imaging method. Thereafter, experimental validation was performed with arrays of different elevation lengths, where an excellent match with the numerical results was observed. Furthermore, the crack sizing was performed using a 6-dB-drop rule, which assisted in accurately predicting the shape and size of the SBCs and is shown to measure the depth of SBCs with greater confidence. It is shown that a reduced array elevation with the hybrid imaging method and sizing method yields improved image resolution contrary to conventional linear arrays. This approach can offer a significant improvement in manifesting complete comprehension of the spatial defect relationship, enabling NDT engineers to analyse the inspection results quantitatively in 3D for progressive reliability.

Fabrication of Array-analytic Ultrasonic Focused Transducer and Research of Spatial-sensing Method

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Design and Application of Ultrasound Focused Transducer for the Ultrasonic Feature Imaging Testing System

A Simplified Integration of Multi-Channel Ultrasonic Guided Wave System for Phased Array Detection and Total Focusing Imaging

Improve Spatial Resolutions of Ultrasonic Phased-Array Inspection Using SAFT

Design and application of line-focus air-coupled ultrasonic transducer based on air-based piezoelectric composites

Ultrasonic flexible array for non-destructive testing of complex curved surfaces

Investigation of a Multi-Element Focused Air-Coupled Transducer

3D ultrasonic imaging of surface-breaking cracks using a linear array

High-Speed Linear Array Ultrasonic Phased Array Automatic Testing

Investigation of an Active Focusing Planar Piezoelectric Ultrasonic Transducer

The design and test of MEMS piezoresistive ultrasonic sensor arrays

Numerical and Experimental Analysis of Focused Air-Coupled Ultrasonic Transducer Based on Cross-Linked Polypropylene Film

Optimization by Simulation and Development of Narrow Beam Array Transducer

A Generic Time-Frequency Analysis-Based Signal Processing and Imaging Approach for Air-Coupled Ultrasonic Testing

A Novel Serrated Columnar Phased Array Ultrasonic Transducer

Investigation of Ultrasonic Scattering Matrix Extraction of A Surface Defect Using Ultrasonic Arrays

Design and Fabrication of Air-Based 1-3 Piezoelectric Composite Transducer for Air-Coupled Ultrasonic Applications

Analyzing and Experiment of Ultrasonic Field with Immersion Focusing Ultrasonic Test in Angle Beam Incidence