Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

A Generic Time-Frequency Analysis-Based Signal Processing and Imaging Approach for Air-Coupled Ultrasonic Testing

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Analysis and Denoising of Electric Noise in Phased Array Ultrasonic Testing System

A flaw echo detection method based on S-transformation and time-frequency spectrum spatial filtering

Ultrasonic Dynamic Plane Wave Imaging for High-Speed Railway Inspection

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

The System and Method of Ultrasonic Testing Based on Linear-Frequency-Modulation Technique

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

Fabrication of Array-analytic Ultrasonic Focused Transducer and Research of Spatial-sensing Method

A Novel Adaptive Time-Frequency Filtering Approach to Enhance the Ultrasonic Inspection of Stainless Steel Structures

Ultrasonic Detection Method Based on Flexible Capillary Water Column Arrays Coupling

Signal Processing in Ultrasonic Test of Austenitic Welds Based on Time-Frequency Analysis

Improved Amplitude Extraction Method for Attenuation Reconstruction of Transmissive Ultrasonic Tomography

Ultrasonic Thickness Measurement Method and System Implementation Based on Sampling Reconstruction and Phase Feature Extraction

Ultrasonic Array F-SAFT Imaging Method with PSM

A Quantitative Review of Air-Coupled Ultrasonic Lamb Wave Analysis Based on Signal Transformations

Adaptive Frequency Divers Filtering Techniques for Ultrasonic Analysis

Research on Digital Testing System of Evaluating Characteristics for Ultrasonic Transducer

Improve Spatial Resolutions of Ultrasonic Phased-Array Inspection Using SAFT

Dispersion Compensation and Modes Separation of Ultrasonic Guided Waves in Long Cortical Bone