Abstract:Magnesium-zinc-calcium (Mg-Zn-Ca) alloys as a biomaterial have attracted much attention recently, owing to their excellent biocompatibility, similar mechanical properties to natural bone, and biodegradable properties. Despite the numerous advantages of MgZnCa alloys, the rapid degradation of magnesium proved challenging as the implant in unable to retain its structural integrity for a sufficient duration of time. For metallic glasses, the capability to produce a bulk sample that is sufficiently large for useful applications have been far less successful owing to challenging processing parameters that are required for rapid cooling. In this study, Mg65Zn30Ca5 melt-spun ribbons were produced using melt-spinning followed by spark plasma sintering under high pressure (60 MPa) at different temperatures (130–170 °C) to provide an insight into the consolidation, mechanical, and corrosion behavior. Microstructural interfaces were characterized using scanning electron microscopy while the thermal stability of the amorphous phase was characterized using differential scanning calorimetry and X-ray diffraction. Here, pellets with 10 mm diameter and 10 mm height with a complete amorphous structure were achieved at a sintering temperature of 150 °C with densification as high at ~98%. Sintering at higher temperatures, while achieving higher densification, resulted in the presence of nano-crystallites. The mechanical properties were characterized using microhardness and compression tests. The hardness values of the sintered products were relatively higher to those containing crystallite phases while the ultimate compressive strength increased with increasing sintering temperature. Bio-corrosion properties were characterized via electrochemical testing with PBS as the electrolyte at 37 °C. The corrosion results suggest that the sintered samples have a significantly improved corrosion resistance as compared to as-cast samples. More notably, SPS150 (samples sintered at 150 °C) exhibited the best corrosion resistance (35× compared to as-cast in the context of corrosion current density), owing to its single-phase amorphous nature. This study clearly shows the potential of spark plasma sintering in consolidating amorphous ribbons to near-full density bulk pellets with high corrosion resistance for bio-applications.

Corrosion Fatigue Behavior of A Mg-Based Bulk Metallic Glass in A Simulated Physiological Environment

Recent progress in fatigue behavior of Mg alloys in air and aqueous media: A review

[Necessity of standardization of methods for serum bilirubin determination].

Corrosion Of, and Cellular Responses to Mg–Zn–Ca Bulk Metallic Glasses

Corrosion Fatigue Behaviors of Two Biomedical Mg Alloys-Az91d and We43-In Simulated Body Fluid

Research Progress on Corrosion Fatigue Behavior of Biomedical Degradable Magnesium-Based Alloys

Biodegradable Mg–Zn–Ca-Based Metallic Glasses

Development of Biocompatible Bulk MgZnCa Metallic Glass with Very High Corrosion Resistance in Simulated Body Fluid

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Effect of powder size on strength and corrosion behavior of Mg66Zn30Ca4 bulk metallic glass

On the Corrosion Fatigue of Magnesium Alloys Aimed at Biomedical Applications: New Insights from the Influence of Testing Frequency and Surface Modification of the Alloy ZK60

Study on bio-corrosion and cytotoxicity of a Sr-based bulk metallic glass as potential biodegradable metal

Fatigue and Corrosion Fatigue Properties of Mg–Zn–Zr–Nd Alloys in Glucose-Containing Simulated Body Fluids

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids

Fatigue of Metallic Glasses

Mechanical properties and corrosion resistance of large-size biodegradable Ca–Mg–Zn bulk metallic glasses fabricated via powder metallurgy

Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Study on mechanical and degradation behavior of Zn–Mn-xMg alloys under coupling effects of stress and SBF

Corrosion Products on Biomedical Magnesium Alloy Soaked in Simulated Body Fluids

Corrosion Performances in Simulated Body Fluids and Cytotoxicity Evaluation of Fe-based Bulk Metallic Glasses

Investigation of Mechanical and Corrosion Properties of New Mg-Zn-Ga Amorphous Alloys for Biomedical Applications