Abstract:Magnesium-zinc-calcium (Mg-Zn-Ca) alloys as a biomaterial have attracted much attention recently, owing to their excellent biocompatibility, similar mechanical properties to natural bone, and biodegradable properties. Despite the numerous advantages of MgZnCa alloys, the rapid degradation of magnesium proved challenging as the implant in unable to retain its structural integrity for a sufficient duration of time. For metallic glasses, the capability to produce a bulk sample that is sufficiently large for useful applications have been far less successful owing to challenging processing parameters that are required for rapid cooling. In this study, Mg65Zn30Ca5 melt-spun ribbons were produced using melt-spinning followed by spark plasma sintering under high pressure (60 MPa) at different temperatures (130–170 °C) to provide an insight into the consolidation, mechanical, and corrosion behavior. Microstructural interfaces were characterized using scanning electron microscopy while the thermal stability of the amorphous phase was characterized using differential scanning calorimetry and X-ray diffraction. Here, pellets with 10 mm diameter and 10 mm height with a complete amorphous structure were achieved at a sintering temperature of 150 °C with densification as high at ~98%. Sintering at higher temperatures, while achieving higher densification, resulted in the presence of nano-crystallites. The mechanical properties were characterized using microhardness and compression tests. The hardness values of the sintered products were relatively higher to those containing crystallite phases while the ultimate compressive strength increased with increasing sintering temperature. Bio-corrosion properties were characterized via electrochemical testing with PBS as the electrolyte at 37 °C. The corrosion results suggest that the sintered samples have a significantly improved corrosion resistance as compared to as-cast samples. More notably, SPS150 (samples sintered at 150 °C) exhibited the best corrosion resistance (35× compared to as-cast in the context of corrosion current density), owing to its single-phase amorphous nature. This study clearly shows the potential of spark plasma sintering in consolidating amorphous ribbons to near-full density bulk pellets with high corrosion resistance for bio-applications.

Mechanical properties and corrosion resistance of large-size biodegradable Ca–Mg–Zn bulk metallic glasses fabricated via powder metallurgy

Effect of powder size on strength and corrosion behavior of Mg66Zn30Ca4 bulk metallic glass

Biodegradable Mg–Zn–Ca–Sr Bulk Metallic Glasses with Enhanced Corrosion Performance for Biomedical Applications

Biodegradable Mg–Zn–Ca-Based Metallic Glasses

Development of Biocompatible Bulk MgZnCa Metallic Glass with Very High Corrosion Resistance in Simulated Body Fluid

Core-shell Mg<sub>66</sub>Zn<sub>30</sub>Ca<sub>4</sub> bulk metallic glasses composites reinforced by Fe with high strength and controllable degradation

Corrosion Of, and Cellular Responses to Mg–Zn–Ca Bulk Metallic Glasses

Core-shell Mg66Zn30Ca4 bulk metallic glasses composites reinforced by Fe with high strength and controllable degradation

New biodegradable Mg–Zn–Ca bulk metallic glass composite with large plasticity reinforced by SnZn alloy

Study on bio-corrosion and cytotoxicity of a Sr-based bulk metallic glass as potential biodegradable metal

Mechanical Properties and Corrosion Resistance of Powder Metallurgical Mg-Zn-Ca/Fe Bulk Metal Glass Composites for Biomedical Application

In Vitro Investigation of Mg–Zn–Ca–Ag Bulk Metallic Glasses for Biomedical Applications

Design and Characterization of Biodegradable Mg-Zn-Ag Metallic Glasses

Composition-dependent Structural and Electronic Properties of Mg(95-x)Zn(x)Ca5 Metallic Glasses: an Ab Initio Molecular Dynamics Study.

Development of Mg-Based Bulk Metallic Glasses and Applications in Biomedical Field

Biodegradable CaMgZn Bulk Metallic Glass for Potential Skeletal Application

In Vitro and in Vivo Studies on Biodegradable CaMgZnSrYb High-Entropy Bulk Metallic Glass

Effects of Sr on the glass-forming ability and corrosion behaviour of Mg–Zn–Ca–Cu bulk metallic glass

Corrosion Fatigue Behavior of A Mg-Based Bulk Metallic Glass in A Simulated Physiological Environment

Enhancing Mechanical and Biocorrosion Response of a MgZnCa Bulk Metallic Glass through Variation in Spark Plasma Sintering Time

Study on glass-forming ability and corrosion performance of Ca-based biomedical materials