Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

Fabrication and Characterization of A Microaccelerometer Based on Resonant-Tunneling Diodes

GaAs Accelerometer Based on Resonant Tunneling Micro-structure

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Design and Testing on High Sensitive Micro-accelerometer Based on HEMT

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

Design, Fabrication, and Characterization of a High-Performance Monolithic Triaxial Piezoresistive High-g Accelerometer

A micromachined silicon resonant accelerometer

Fabrication, Characterization And Failure Analysis Of A Novel Mems Tunneling Accelerometer

GaAs-based resonant tunneling diode (RTD) epitaxy on Si for highly sensitive strain gauge applications

A Bulk Micromachined Si-on-Glass Tunneling Accelerometer

A micromachined resonant accelerometer

Design, fabrication, and characterization of a high-sensitivity integrated quartz vibrating beam accelerometer

Fabrication and Characterization of Tunneling Current of Anodic Bonded Dry-Etched MEMS Tunneling Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Fabrication Technology and Characteristics Research of the Acceleration Sensor Based on Li-Doped ZnO Piezoelectric Thin Films

Microresonant Accelerometer Composed of Silicon Substrate and Quartz Double-Ended Tuning Fork with Temperature Isolator

A novel out-of-plane MEMS tunneling accelerometer

Design and analysis of micromechanical resonant accelerometer

Novel High Sensitivity Accelerometer Based on A Microfiber Loop Resonator

A microchip optomechanical accelerometer