Abstract:We present the fabrication of conductive graphitic microelectrodes in diamond by using pulsed Bessel beams in the burst mode laser writing regime. The graphitic wires are created in the bulk of a 500 {\mu}m thick monocrystalline HPHT diamond (with (100) orientation) perpendicular to the sample surface, without beam scanning or sample translation. In particular, the role of different burst features in the resistivity of such electrodes is investigated for two very different sub-pulse durations namely 200 fs and 10 ps, together with the role of thermal annealing. Micro-Raman spectroscopy is implemented to investigate the laser-induced crystalline modification, and the results obtained by using two different laser repetition rates, namely 20 Hz and 200 kHz, are compared. A comparison of the micro-Raman spectra and of the resistivity of the electrodes fabricated respectively with 10 ps single pulses and with bursts (of sub-pulses) of similar total duration has also been made, and we show that the burst mode writing regime allows to fabricate more conductive micro electrodes, thanks to the heat accumulation process leading to stronger graphitization. Moreover, the microfabrication of diamond by means of the longest available bursts (~ 46.7 ps duration) featured by 32 sub-pulses of 200 fs duration, with intra-burst time delay of 1.5 ps (sub-THz bursts), leads to graphitic wires with the lowest resistivity values obtained in this work, especially at low repetition rate such as 20 Hz. Indeed, micro electrodes with resistivity on the order of 0.01 {\Omega} cm can be fabricated by Bessel beams in the burst mode regime even when the bursts are constituted by femtosecond laser sub-pulses, in contrast with the results of the standard writing regime with single fs pulses typically leading to less conductive micro electrodes.

Directionality in Laser Fabrication of 3D Graphitic Microwires in Diamond

Peripheral-photoinhibition-based Direct Laser Writing with Isotropic 30 Nm Feature Size Using a Pseudo 3D Hollow Focus

High Conductivity Micro-Wires In Diamond Following Arbitrary Paths

High Throughput Laser Nano Direct Writing Technique

Three-dimensional Nanoscale Vortex Line Visualization and Chiral Nanostructure Fabrication of Tightly Focused Multi-Vortex Beams Via Direct Laser Writing

Laser Direct Writing Using Submicron-Diameter Fibers.

Effect of Crystallographic Orientation on the Potential Barrier and Conductivity of Bessel Written Graphitic Electrodes in Diamond

Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond

Inscription of 3D waveguides in diamond using an ultrafast laser

Bessel beam fabrication of graphitic micro electrodes in diamond using laser bursts

Fabrication and electrical characterization of three-dimensional graphitic microchannels in single crystal diamond

Study of Electrode Fabrication in Diamond with a Femto‐Second Laser

Direct fabrication of three-dimensional buried conductive channels in single crystal diamond with ion microbeam induced graphitization

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

A General Approach For Fabricating Arc-Shaped Composite Nanowire Arrays By Pulsed Laser Deposition

A General Approach for Fabricating Arc‐Shaped Composite Nanowire Arrays by Pulsed Laser Deposition

Raman Study of the Diamond to Graphite Transition Induced by the Single Femtosecond Laser Pulse on the (111) Face

Experimental Parametric Investigation of Nanosecond Laser-Induced Surface Graphitization of Nano-Crystalline Diamond

Characterization of Three-Dimensional Microstructures in Single Crystal Diamond

Molecular dynamics simulation of laser-induced graphitization of CVD diamond

High aspect ratio diamond nanosecond laser machining