Abstract:The accurate prediction of heat transfer behavior in packed bed is of great importance to the design and operation of this kind of facility. In this paper, heat transfer between packed bed and adjacent wall in heat recovery processing is investigated theoretically and experimentally. A bed-to-wall heat transfer model is presented with consideration of two essential components including particle-to-wall contact heat transfer and heat conduction through the thermal penetration layer. Details of model parameter determination are provided. Through comprehensive sensitivity analysis of those parameters, it is shown that particle temperature, particle residence time and particle diameter are critical parameters to heat transfer coefficient. Besides, surface roughness, solid thermal conductivity and environmental gas species are all influencing factors of the overall heat transfer coefficient. In particular, a dimensionless particle residence time is introduced to characterize the combining effect of residence time, effective thermal conductivity and wall contact heat transfer. Meanwhile, a revised simplified formula for calculating particle contact heat transfer coefficient is correlated as well, which provides better prediction than the one widely adopted in previous studies. Furthermore, experimental heat transfer test on an industrial packed bed char cooler is performed for validating the model predicting capability in heat recovery process. The systematical test on a bench scale packed bed heat exchanger has also been carried out. Parametric analysis of the experimental data is consistent with the conclusions drawn from the model analysis section. The model provides good predicting accuracy on the overall heat transfer coefficient from the bench scale facility as well as data from the field test by correlating 95% of the measured data within ±20%. The implementation of the proposed model shows good prediction of heat transfer coefficient in packed bed for heat recovery purpose. It is recommended that the model can be applied in industrial design.

Pressure drop in a packed bed with sintered ore particles as applied to sinter coolers with a novel vertically arranged design for waste heat recovery

Wall Effects on the Pressure Drop in Packed Beds of Irregularly Shaped Sintered Ore Particles

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

Determination of Pressure Drop for Air Flow Through Sintered Metal Porous Media Using A Modified Ergun Equation

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Experimental study on the permeability and resistance characteristics in the packed bed with the multi-size irregular particle applied in the sinter vertical waste heat recovery technology

Measurement and Correlation of Pressure Drop Characteristics for Air Flow Through Sintered Metal Porous Media

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Determination of Pressure Drop Correlation for Air Flow through Packed Bed of Sinter Particles in Terms of Euler Number

Experimental Study and X-Ray Microtomography Based Cfd Simulation for the Characterization of Pressure Drop in Sinter Bed

Numerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore

A Comprehensive Characterization on the Structural and Thermophysical Properties of Sintered Ore Particles Toward Waste Heat Recovery Applications

Experimental Study on Storage Performance of Packed Bed Solar Thermal Energy Storage System Using Sintered Ore Particles

A Study of a Two-Phase Heat Transfer Mechanism in a Vertical Sintering Cooling Furnace

Solids mass flux and mean dynamic solids hold-up in the packed section of the gas-solid-solid circulating fluidized bed

The effect of particle arrangement on the direct heat extraction of regular packed bed with numerical simulation

Investigation on the Evolution Characteristics of Bed Porous Structure During Iron Ore Sintering

A novel model of pressure drop for airflow penetrating randomly packed cylindrical particles

Experimental Study on Energy Storage Performances of Packed Bed with Different Solid Materials

Theoretical and experimental analysis of bed-to-wall heat transfer in heat recovery processing

Flow and heat transfer characteristics in randomly packed beds with small D/d ratios