Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Fabrication and Characterization of In-Situ Grown Carbon Nanotubes Reinforced SiC/SiC Composite

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Study on the In Situ Growth of Carbon Nanotubes for the Reinforcement of Cf/SiC Composite Fabricated by CVI+PIP Process

In-situ Grown Carbon Nanotubes and Their Applications for SiCf/SiC Composites

In Situ Growth Carbon Nanotube Reinforced SiCf/SiC Composite

A Novel Preparation and Properties of In-Situ Grown Carbon Nanotube Reinforced Carbon/carbon Composites

One-Step Fabrication of Ceramic and Carbon Nanotube (CNT) Composites by In Situ Growth of CNTs

Fabrication of Al 2 O 3 – Ni – CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al 2 O 3 powder and spark plasma sintering

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Mechanical Properties of SiCf/SiC Composites Reinforced by In-Situ Grown Carbon Nanotubes

Fabrication of C/C Composites by Catalytic Chemical Vapor Infiltration

Fabrication of SiCf/SiC Composite with in Situ Grown SiC Nanowire by Polymer and Infiltration Pyrolysis Process

Enhanced Mechanical Behavior and Fabrication of Silicon Carbide Particles Covered by In-Situ Carbon Nanotube Reinforced 6061 Aluminum Matrix Composites

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Densification Kinetics and Mechanical Properties of Carbon/Carbon Composites Reinforced with Carbon Nanotubes Produced in Situ

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Enhanced thermal and mechanical properties of optimized SiC<sub><i>f</i></sub>/SiC composites with in-situ CNTs on PyC interface

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Preparation and Mechanical Properties of Continuous Carbon Nanotube Networks Modified Cf/SiC Composite