Microstructure and Thermal Properties of Al/W-Coated Diamond Composites Prepared by Powder Metallurgy

Chun Zhang,Zhiyong Cai,Richu Wang,Chaoqun Peng,Ke Qiu,Naiguang Wang

DOI: https://doi.org/10.1016/j.matdes.2016.01.085

IF: 9.417

2016-01-01

Materials & Design

Abstract:Al/(35–60) vol.% diamond composites are prepared by hot pressing, and the microstructures, thermal conductivity, and coefficient of thermal expansion (CTE) are characterized considering the tungsten coating and the volume fraction of diamond. The results show that diamond particles distribute quite uniform in Al matrix without formation of Al4C3 phase at the interface. Although the tungsten coating effectively improves the interface bonding between the diamond and matrix, relative densities decrease with increasing diamond fraction. The thermal conductivity of W-coated specimens containing 35–50vol.% of diamond are about 90% of the theoretical values, but it decreases with further increasing diamond fraction due to the existence of higher porosity. However, most of the thermal conductivity of uncoated specimens are less than 90% of the calculated ones. CTE of the composites is found to decrease as the diamond fraction increases, and the W-coated specimens are more effectively to suppress the thermal expansion of Al matrix.