Abstract:Zinc alloys shows strong strain rate dependent and anisotropic mechanical behaviours, the mechanistic origin of which is however not fully understood. In this work, a combination of the experiments and crystal plasticity finite element simulations were used to gain an insight into the relation between deformation mechanisms, tensile deformation behaviour and texture evolution, especially for the incipient plastic deformation stage. To this end, specimens were cut from Zn-Cu-Ti alloy sheets at various orientations with respect to the rolling direction, and uniaxial tensile tests were conducted at different strain rates ranging from 10-3 to 5 x 10-2 s- 1. The microstructure evolution with the deformation was examined by the electron backscatter diffraction technique. Crystal plasticity model was calibrated considering the effect of strain rate on the flow stress, and finite element simulations were carried out based on a representative volume element of the polycrystal zinc alloy. It is found out that the flow stress increases significantly, as the loading direction approaches the transverse direction, which results in a lower relative activity of basal slip and higher relative activity of non-basal ones. This, in turn, reduces the rotation of the c-axis of the crystallites towards ND during tensile tests. On the other hand, a positive strain rate sensitivity is found in the zinc alloy. Meanwhile, increasing strain rate leads to an obvious decrease in the activity of the pyramidal pi-II slip systems, accompanied by more activated twinning systems. The lower activity of the pyramidal pi-II slip at a higher strain rate probably hinders the development of CDRX and grain fragmentation at large strain levels.

Influence of Strain Rate on the Orientation Dependence of Microstructure in Nickel Single Crystals

Atomic Simulation of the Effect of Orientation on Tensile/compressive Properties in Nickel-Based Single Crystal Superalloys

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Microstructure Characterization and Damage Coupled Constitutive Modeling of Nickel-Based Single-Crystal Alloy with Different Orientations

The Effect of Small Orientation Deviation from [001] to [011] on High-Temperature Creep Properties of Nickel-Based Single Crystal

The Study of Tension/Compression Asymmetry of [111] Oriented Nickel Base Single Crystal Superalloys

The Effect of Lattice Orientation on the Film Hole Deformation of Nickel-Based Single Crystal Plate Specimen

A Large Deformation Atomistic Study Examining Crystal Orientation Effects on the Stress–strain Relationship

Effects of Strain Rate, Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

Effect of Crystallographic Orientation on Nano-indentation Behavior of Nickel Based Single Crystal Super Alloys

Strain Rate and Anisotropic Effects on Incipient Plastic Deformation of Zn–Cu–Ti Alloy Sheets

Effect of Strain Rate on Microstructure Evolution of a Nickel-Based Superalloy During Hot Deformation

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Deformation Localization in a Single Crystal Nickel-Based Superalloy Oriented for Multiple Slip

Mapping the Strain-Rate and Grain-Size Dependence of Deformation Behaviors in Nanocrystalline Face-Centered-cubic Ni and Ni-based Alloys

The deformation mechanism of nanocrystalline nickel under high strain rate

Molecular dynamics study of the mechanical behavior of nickel nanowire: Strain rate effects

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Orientation dependence of microstructure deformation mechanism and tensile mechanical properties of Nickel-based single crystal superalloys: A molecular dynamics simulation

EBSD Study of Strain Dependent Microstructure Evolution During Hot Deformation of a Typical Nickel-Based Superalloy