Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

Deformation Localization in a Single Crystal Nickel-Based Superalloy Oriented for Multiple Slip

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Orientation and temperature dependence of yielding and deformation behavior of a nickel-base single crystal superalloy

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation

Orientation dependence of microstructure deformation mechanism and tensile mechanical properties of Nickel-based single crystal superalloys: A molecular dynamics simulation

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Influence of crystal orientations on the creep fracture of a nickel-based single crystal superalloy

In-situ fatigue behavior study of a nickel-based single-crystal superalloy with different orientations

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

In situ EBSD study of formation and propagation of deformation bands in a single-crystal superalloy during tensile deformation

Crystal Orientation Effect on Fretting Fatigue Induced Geometrically Necessary Dislocation Distribution in Ni-based Single-Crystal Superalloys

Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy

Anisotropic Tensile Properties in Ni-Based Single-Crystal Superalloy DD6 near [001] Orientation at 760°C

Deformation Modes in the Single-Crystal Nickel-Based Superalloy CMSX-4 During Compressive Deformation at 1000 °C

In-situ Observations of the Effects of Orientation and Carbide on Low Cycle Fatigue Crack Propagation in a Single Crystal Superalloy

Anisotropic Thermomechanical Fatigue of a Nickel-Base Single-Crystal Superalloy Part I: Effects of Crystal Orientations and Damage Mechanisms

High-Temperature Creep Behavior of a Nickel-Based Single-Crystal Superalloy with Small-Angle Deviation from [111] Orientation

Orientation-Dependent Characteristics for Residual Grains During Hot Deformation of Nickel-Based Alloy 925

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy