Abstract:The paper focuses on an experimental investigation of the high-temperature resistance performance of TRC thin-plates with different cementitious materials. The effects of different cement matrix materials on the bearing capacity of the thin-plates were compared by using the unstressed residual temperature test method (URT). The results indicated that, from the macro view, TRC thin-plates with epoxy resin impregnated textile (type 1) exhibited obvious brittle failure characteristics no matter which kind of cementitious materials was selected. The bursting ratio of type 1 was 100% when the target temperature (T-R) reached 400 degrees C; while TRC thin-plates with non-impregnated textile (type 2) were characterized by ductility. When T-R <= 600 degrees C, no significant difference in the bearing capacity was observed between the type 2 specimens using alumina cement as matrix (CAC specimens) or using ordinary Portland cement as matrix (OPC specimens). The bearing capacity of CAC specimens after 800 degrees C could be up to 32% of that at room temperature, which is 1.7 times of OPC specimens. Furthermore, the surface of CAC specimens did not crack or flake off which proved a better high-temperature resistance performance than OPC specimens. On the other hand from the micro perspective, thermogravimetric analysis, pore distribution and micro-structural analysis were performed to evaluate the degradation of the damaged specimens using thermogravimetric analyzer (TGA), mercury intrusion porosimeter and an environmental scanning electron microscope (SEM), respectively. The results showed that declination of bearing capacity after high temperature was mainly due to degraded filaments, the increasing pore size of matrix and the decreasing bonding between fiber and matrix. The average pore diameter of CAC matrix was only 28% of OPC matrix after 800 degrees C; and the loss in strength of CAC matrix was obviously less severe than that of OPC matrix between 600 degrees C and 800 degrees C. Conclusively, using high alumina cement as matrix could effectively reduce the thermal degradation of the matrix at high temperatures. (C) 2016 Elsevier Ltd. All rights reserved.

Mechanical behaviour of TRC thin-plates exposed to high temperature: experimental study

Effectiveness of TRC Jackets for the Strengthening of Concrete Columns after Elevated Temperatures: Experimental and Analytical Investigation

The High-Temperature Resistance Performance of Trc Thin-Plates with Different Cementitious Materials: Experimental Study

High temperature mechanical performance and micro interfacial adhesive failure of textile reinforced concrete thin-plate

Residual Flexural Behaviour of RC Beams Strengthened with TRC after ISO 834 Exposure

Experimental Evaluation of Carbon Reinforced TRC with Cement Suspension Matrix at Elevated Temperature

Flexural Behavior of TRC Contained Chopped Fibers Subjected to High Temperature

Experimental Study on Mechanicial Properties of TRC Plate

Concrete confinement with TRM versus FRP jackets at elevated temperatures

Mechanical behavior of textile reinforced concrete with newly developed mineral-impregnated carbon fabrics submitted to elevated temperatures

Residual Strengths of RC Beams Strengthened with Basalt and Carbon Textile Reinforced Mortars After Exposure to Elevated Temperatures

Experimental study on reinforced concrete beams strengthened with Basalt and Carbon Textile Reinforced mortars at elevated temperatures

Experimental Investigation of the TRM-to-Masonry Bond after Exposure to Elevated Temperatures: Cementitious and Alkali-Activated Matrices of Various Densities

Effect of Textile Layers and Hydroxypropyl Methylcellulose on Flexural Behavior of TRLC Thin Plates

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Effect of high temperature on FRCM‐confined concrete

Unlocking the role of recycled polymer fibres on dynamic fracture characteristics of concrete after exposure to elevated temperatures

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Mechanical Properties and Durability of Textile Reinforced Concrete (TRC)-A Review

Improved Mechanical Properties of Textile Reinforced Concrete Thin Plate

Thermomechanical Behavior and Microstructure Properties of Carbon Fiber Reinforced Polymer at Elevated Temperatures