Abstract:Steel-basalt hybrid fibers reinforced cementitious composites (SBFRCC) have excellent mechanical properties, and current studies mainly focused on the macroscopic or microscopic properties of SBFRCC at room temperature separately. However, the macroscopic and microscopic properties of SBFRCC subjected to elevated temperatures, especially their correlation relationships are still unclear. Hence, this study aims to investigate the macroscopic and microscopic properties and their correlation relationships of SBFRCC subjected to elevated temperatures. Firest, the mass loss rate, three-point bending, uniaxial compressive, mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) tests were conducted subjected to elevated temperatures. Then, the cor-relations between mass loss rate, fracture, uniaxial compressive behavior and pore structure were analyzed based on a correlation analysis approach. The results show that steel fiber and basalt fiber can effectively restrict crack initiation and propagation subjected to elevated temperatures. Uniaxial compressive strength and elastic modulus decrease with temperature while peak strain increases below 600 degrees C and drops after 600 degrees C. With the increase of temperature, the gel pore and transitional pore decrease, the large pores increase, the porosity in-creases, and the pore structure is "coarsened" significantly. The correlation coefficient between uniaxial compression strength and porosity is the highest, and it is reasonable to use porosity to characterize the changes of uniaxial compressive strength subjected to elevated temperatures. Gel pore has the highest correlation with initiation fracture toughness while large pore has the highest correlation with mass loss rate, unstable fracture toughness, fracture energy, and elastic modulus. Gel pore directly affects the generation of cracks while large pore directly affects the propagation of cracks.

Mechanical behavior of textile reinforced concrete with newly developed mineral-impregnated carbon fabrics submitted to elevated temperatures

Experimental Evaluation of Carbon Reinforced TRC with Cement Suspension Matrix at Elevated Temperature

Effectiveness of TRC Jackets for the Strengthening of Concrete Columns after Elevated Temperatures: Experimental and Analytical Investigation

Experimental study on reinforced concrete beams strengthened with Basalt and Carbon Textile Reinforced mortars at elevated temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Mechanical behaviour of TRC thin-plates exposed to high temperature: experimental study

Experimental Investigation of Concrete Cylinders Confined with PBO FRCM Exposed to Elevated Temperatures

Effect of high temperature on FRCM‐confined concrete

Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement-Based Material at Elevated Temperature

Concrete confinement with TRM versus FRP jackets at elevated temperatures

Long-Term Bonding and Tensile Strengths of Carbon Textile Reinforced Mortar

High temperature mechanical performance and micro interfacial adhesive failure of textile reinforced concrete thin-plate

Tensile Behavior Assessment of Grid-Type CFRP Textile-Reinforced Mortar with Different Design Variables

Experimental Investigation of the TRM-to-Masonry Bond after Exposure to Elevated Temperatures: Cementitious and Alkali-Activated Matrices of Various Densities

Flexural Behavior of TRC Contained Chopped Fibers Subjected to High Temperature

Influence of Cementitious Material Infiltration on Piezoresistive Effect of Carbon Fiber Bundle

Residual Strengths of RC Beams Strengthened with Basalt and Carbon Textile Reinforced Mortars After Exposure to Elevated Temperatures

Fabric-Reinforced Cementitious Matrix (FRCM) Carbon Yarns with Different Surface Treatments Embedded in a Cementitious Mortar: Mechanical and Durability Studies

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Investigation on physicochemical and piezoresistive properties of smart MWCNT/cementitious composite exposed to elevated temperatures

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates