Abstract:Ships have become an important source of SO2 emission in coastal areas with the rapid development of maritime transport. It is of great significance to develop a marine scrubber for reducing SO2 emission of ships. In this study, numerical simulation of a full-scale marine spray scrubber is conducted to investigate two-phase flow pattern and SO2 absorption process in the scrubber. A desulfurization model based on seawater absorbent is coupled into the simulation, which considers the mass transfer between phases and seawater aqueous phase chemistry simultaneously. A distribution ring is introduced in the scrubber to enhance the desulfurization performance of the scrubber. The result of simulation shows that the distribution ring can optimize effectively the distribution of gas-liquid phases and enhance the SO2 absorption. Under vertical condition, the desulfurization efficiency could be promoted approximate 6% after installing a distribution ring. The inclined condition resulting from the ship swinging could lead to the uneven distribution of droplets and an obvious decrease (8.7%) of desulfurization efficiency, whereas the desulfurization performance of the scrubber could be ensured with a distribution ring installed even under an inclined condition. Finally, a spray scrubber design scheme has been developed and successfully applied in the exhaust gas cleaning system (EGCS) of a container ship. Test result shows the outlet average value of SO2/CO2 can be reduced to 3.55. Meanwhile, the consistency of test data and calculation result indicates the applicability of the numerical model established for the simulation and optimization of the scrubber in industrial applications also. Implications: EGCS is an effective method to reduce SO2 emission of marine industry. However, different from a land desulfurization tower, the application of a spray scrubber in EGCS faces more problems due to the different application scenarios and complex sea conditions (inclined condition resulting from ships swinging and so on) during sailing. In this work, a numerical model capable of investigating physical and chemical phenomena in the scrubber simultaneously is established, which can produce a great amount of data for the operation instruction of EGCS and the design and optimization of the marine spray scrubber. The distribution ring is introduced in the marine spray scrubber to intensify the SO2 absorption and enhance the desulfurization performance of the scrubber under different working conditions.

Experimental Study and Model Analysis of Sodium Desulfurization in Marine Application

The desulfurization properties and mechanism of Ni2+ modified zeolites for desulfurization of model diesel

The Desulfurization Properties and Mechanism of Ni~(2+) Modified Zeolites for Desulfurization of Model Diesel

Simulation investigation on marine exhaust gas SO2 absorption by seawater scrubbing

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

Model Study of Sulfite Oxidation in Seawater Flue Gas Desulfurization Retain-->by Cylindrical Wetted-Wall Corona-Streamer Discharge

Experimental and Theoretical Studies on Desulfurization Efficiency of Dual-alkali FGD System in a RST Scrubber

Evaluation of a crossed fused renal ectopia in a paediatric patient using 99mTc-DMSA SPECT/CT.

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

Modeling and simulation of marine SCR system based on Modelica

Simulation of SO2 removal process from marine exhaust gas by hybrid exhaust gas cleaning systems (EGCS) using seawater and magnesium-based absorbent

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Study on Optimization Simulation of Scr Denitration System for Marine Diesel Engine

Experimental Study on Desulfurization Characteristics of Dry Sorbent Injection at Low SO2 Concentrations

Experimental Study on Removal Characteristics of SO3 by Wet Flue Gas Desulfurization Absorber

A Nonequilibrium Stage Model to Simulate the Chemical Absorption of SO2

A brand new two-phase wet oxidation absorption system for the simultaneous removal of SO2 and NOX from simulated marine exhaust gas

Study on the Relationship Between Absorbed S(Iv) and Ph in the Seawater Flue Gas Desulfurization Process

Simultaneous Removal of SO2 and NO from the Flue Gas of Marine Ships with a Gas Cyclone–Liquid Jet Absorption Separator

Experimental investigation of sulfite oxidation enhancement in a micro-pore aeration system

Marine hybrid desulfurization system and method