Abstract:In this work, the most efficient and common engineered surface treatments identified as shot peening (SP), laser shock peening (LSP) and ultrasonic surface rolling process (USRP) were utilized to impact the 300 M ultrahigh strength steel. The microstructure evolution and surface strengthening behavior were carefully characterized and compared for the 300 M steel with various treatments. Besides, the underlying mechanisms for difference in grain refinement and surface mechanical properties by the arranged surface modification are revealed. The results indicate that a gradient structure with nano-grains at the top surface appears on the SP, LSP and USRP treated samples. The process of repeated impacts of SP in different directions leads to activation of multiple slip systems, which thus causes severe refined grains and dense dislocation activities associated with dislocation tangles, dislocation walls and blocking. A great variety of strikes per unit area by USRP results in higher plastic deformation compared to SP where numerous dislocation cells and deformation bands were generated. In contrast to SP and USRP, fewer slip systems are activated in LSP due to the short duration time which thus leads to the thinnest refined grain layer and more planar dislocation structures. The combination of low plastic work and lack of refined grains leads to lowest full width at half maximum (FWHM) in case of LSP samples whereas high FWHM comes from both fine grain size and dislocations in SP. The grain refinement and plastic work contributes to an increase of microhardness and compressive residual stress for the SP, LSP and USRP samples. To be clear, SP leads to a higher magnitude of hardness and compressive residual stress on the topmost surface while LSP causes a larger depth due to that shock wave in LSP influences material to much greater depth. Besides, the decomposition and redistribution of carbides are also noticed on the surface layer after the surface treatments with very high strain rate where numerous dislocations accumulate at the border of the carbides and slip trace is also observed within the carbides.

Effect of Plastic Deformation on Microstructure and Properties of 347 Austenite Steel.

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Influence of Ultrasonic Shot Peening on Microstructure, Mechanical, and Electrochemical Behavior of 316 Stainless Steel

Characterization of Surface Modification of 347 Stainless Steel Upon Shot Peening

Effect of ultrasonic shot peening on microstructure and properties of 301SS

Observation of Magnetic Properties and Microstructural Evolution of 301 Stainless Steel Upon Ultrasonic Shot Peening

Effects of ultrasonic shot peening process on the microstructure and mechanical properties of nickel-based superalloys formed by selective laser melting

Realizing Strength–ductility Synergy in a Lean Duplex Stainless Steel Through Enhanced TRIP Effect Via Pulsed Electric Current Treatment

Influence of Different Deformation on Microstructure and Properties of 304 Austenitic Stainless Steel

Microstructure evolution and surface strengthening behavior of 300 M ultrahigh strength steel under engineered surface treatments

Effect of ultrasonic surface impact on the microstructural characterization and mechanical properties of 316L austenitic stainless steel

Plastic Deformation Effect on Wear and Corrosion resistance of Super Martensitic Stainless Steel

Deformation Behavior of Retained Austenite and Its Effect on Plasticity Based on In-Situ EBSD Analysis for Transformable Ferritic Stainless Steel

Effect of Deformation on Microstructure and Mechanical Properties of Medium Carbon Steel During Heat Treatment Process

Microstructure and Property Evolutions of Q345B Steel during Ultrasonic Shot Peening

Strain-Induced Phase Transformation and Nanocrystallization of 301 Metastable Stainless Steel Upon Ultrasonic Shot Peening

Study of Quenching and Partitioning (Q&P) and Ultrasonic Surface Rolling (USR) Process on Microstructure and Mechanical Property of a High-Strength Martensitic Steel

Effect of Tensile Deformation on Microstructure and Pitting Resistance of BFS600 Austenitic High-strength Stainless Steel

Analysis of Influence of Ultrasonic Shot Peening on Surface Plastic Behavior of Superalloy

Effect of Ultrasonic Impact Treatment Assisted with High Energy Electropulsing on Microstructure of D36 Carbon Steel