Abstract:A hydrophilic membrane commonly performs better in resisting fouling. But most prevailing polymeric membrane materials are hydrophobic thus prone to be fouled in practical operations. The current study presents a facile strategy for the fabrication of superhydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes on the basis of a blending method and a dip-coating technique. A carboxyl-rich substance was firstly blended as an additive in the PVDF membrane matrix during fabrication. The incorporated carboxyl groups acted as anchor sites for the subsequent binding of amine-grafted silica nanoparticles (NPs). After a simple dip-coating operation, the PVDF membrane would be covalently functionalized to be superhydrophilic. Three types of carboxyl-rich additives including poly(methacrylic acid sodium salt), sodium alginate, and ethylenediaminetetraacetic acid (EDTA) were separately used to prepare different primary membranes for respective functionalization operations. The resultant membranes were systematically characterized in terms of hydrophilicity, morphology, permeability, and antifouling performance. Consequently, the simple dip-coating functionalization dramatically enhanced the surface hydrophilicity of all the additive-blended PVDF membranes. All the functionalized membranes obtained a significantly lower initial contact angle, which instantly reduced to < 5 degrees within several seconds. This could be attributed to the hydrophilic chains grafted on the NPs and the proper micro-/nano topography offered by the stack of NPs. Particularly, the EDTA-blended membranes achieved a higher and more stable hydrophilicity. Also, all the functionalized membranes obtained higher water permeabilities as compared with the pristine membrane. Moreover, all the superhydrophilic membranes restored over 80% flux (much higher than the similar to 53% for the pristine membrane) after cleaning in the fouling tests, demonstrating dramatically enhanced antifouling capacity.

Preparation and antifouling performance of thin inorganic ultrafiltration membrane via assisted sol-gel method with different composition of dual additives

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Preparation of nano-TiO2 modified PVDF ultrafiltration membrane

Effect of TiO2 modified layer thickness on the properties of PVDF-TiO2 membrane

Antifouling modification of PVDF membranes via in situ mixed-charge copolymerization and TiO2 mineralization

Preparation of TiO2/PVDF ultrafiltration membrane

Preparation and Characterization of PVDF–SiO2 Composite Hollow Fiber UF Membrane by Sol–gel Method

Fabrication of a Low‐cost Nano‐sio2/pvc Composite Ultrafiltration Membrane and Its Antifouling Performance

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles

Development of High-Antifouling PPSU Ultrafiltration Membrane by Using Compound Additives: Preparation, Morphologies, and Filtration Resistant Properties.

Simple and Effective Preparation of Zwitterionic Anti‐Fouling Poly(vinylidene fluoride) Ultrafiltration Membrane by In Situ Cross‐Linking Polymerization Technology

Preparation and anti-biofouling performance of PSf/TiO2 ultrafiltration membrane by in-situ embedment approach

Novel High-Flux Polyamide/tio2 Composite Nanofiltration Membranes on Ceramic Hollow Fibre Substrates

Dynamically formed poly (vinyl alcohol) ultrafiltration membranes with good anti-fouling characteristics

Preparation of PVDF Porous Membranes by Using PVDF-g-PVP Powder As an Additive and Their Antifouling Property

PVDF–TiO2 Composite Hollow Fiber Ultrafiltration Membranes Prepared by TiO2 Sol–gel Method and Blending Method

Significantly enhanced antifouling and separation capabilities of PVDF membrane by synergy of semi-interpenetrating polymer and TiO2 gel nanoparticles

Preparation and Characterization of Hybrid PVDF/Al2O3 Membrane

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Fabrication of TiO2-modified Polytetrafluoroethylene Ultrafiltration Membranes Via Plasma-Enhanced Surface Graft Pretreatment