Abstract:Over the past decades, the design of evaporators has experienced improvement due to accruing experimental and numerical research on flow boiling. For micro-finned geometries that are deemed promising in augmentation of thermal performance, several empirical models have been developed. Recently, to attain higher accuracies in modeling, authors also resorted to Artificial Intelligence (AI) techniques while encouraging their further investigations. In this case, a database comprised of 1358 experimental heat transfer coefficients (HTC) and frictional pressure drops per unit length (FPD) has been considered for a holistic assessment of flow boiling modeling methods. The wide range of geometric features within the database, which includes tubes with outside diameters from 3 mm to 7 mm, helps to acquire a more reliable evaluation of the models, since the flow boiling mechanism is strongly dependent on the geometric parameters.After evaluating three empirical models for the HTC, it was confirmed that, depending on the diameter, the flow boiling mechanism undergoes alterations pertinent to a balance between convective and nucleate boiling, and the models must be modified to account for these conditions.The mean average deviation (MAD) for the models was recorded to be 11.7 %, 22.2 %, and 21.5 % for Diani et al., Mehendale, and Tang and Li, respectively. Higher accuracies were obtained after modification of the empirical models, of which the most accurate one provides a MAD of 10.13 %. Moreover, by the implementation of a novel approach, for the first time, a power function correlation has been established among dimensionless parameters for a machine learning-powered model. The MAD of 10.9 % and 15.8 % was reported for the Nusselt number and the two-phase multiplier respectively. Artificial Neural Network (ANN) was also considered for modeling, and MADs of 4.6 % and 4.2 % were recorded for the Nusselt number and two-phase multiplier, respectively.

Deep learning-based assessment of saturated flow boiling heat transfer and two-phase pressure drop for evaporating flow

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Flow boiling pressure drop correlation in small to micro passages

Comprehensive study of flow boiling modeling inside helical micro-finned tubes: Empirical, non-convex optimization and deep learning predictive models

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

Machine learning-assisted correlations of heat/mass transfer and pressure drop of microchannel membrane-based desorber/absorber for compact absorption cycles

Evaluation of Frictional Pressure Drop Correlations During Flow Boiling of Refrigerants in Micro-Fin Tubes

Transfer learning model to predict flow boiling heat transfer coefficient in mini channels with micro pin fins

NEW FLOW-PATTERN-BASED HEAT TRANSFER CORRELATIONS FOR WATER IN MICRO/MINICHANNELS

A New Correlation For Subcooled Flow Boiling Heat Transfer In A Vertical Narrow Microchannel

Frictional Pressure Drop During Flow Boiling in Micro-Fin Tubes: A New General Correlation

Heat Transfer Correlations for Single-Phase Flow, Condensation, and Boiling in Microfin Tubes

Pressure drop for subcooled water boiling in microchannels under high heat fluxes: Experiments and predictions from artificial neural networks

A New Heat Transfer Model for Flow Boiling of Refrigerants in Micro-Fin Tubes

A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes

Simple Flow-Pattern Based Heat Transfer Correlations For Flow Boiling In Micro/Minichannels

Study on Flow Boiling of Refrigerants in Micro/Mini-Channels

Improving pressure drop predictions for R134a evaporation in corrugated vertical tubes using a machine learning technique trained with the Levenberg–Marquardt method

Machine learning-based models for frictional pressure drop prediction of condensing and adiabatic flow in micro, mini and macro channels utilizing universal data

Evaluation of prediction models on frictional pressure drop for condensation flow in horizontal circular tubes

Development of Correlations Based on CFD Study for Microchannel Condensation Flow of Environmentally Friendly Hydrocarbon Refrigerants