Abstract:The exploitation of high-voltage GaN power switches enables the development of power converters with superior characteristics with respect to components developed with heritage silicon-based technologies. One of the key advantages of GaN switches is their very fast commutation capability due to reduced parasitic capacitance and inductance with respect to silicon devices. The capability of an accurate evaluation of the switch commutations in the design phase is of crucial importance to maximize performance and avoid reliability or electromagnetic compatibility issues in the final converter. In this paper, an accurate evaluation of high-voltage GaN HEMT commutations is performed, exploiting detailed non-linear dynamic models of transistors and electromagnetic simulations of a PCB. A deep insight into the commutation waveforms in the intrinsic device (i.e., conductive drain current and intrinsic node voltages) is proposed to evaluate and explain the mechanisms of almost lossless turn-off and turn-on commutations in a 7 kW DAB converter. The influence on the performance of the PCB parasitics and the driver characteristics are accurately reproduced by simulations, suggesting important guidelines for the optimal design of power converters fully exploiting GaN HEMT's potential. This detailed simulation/analysis approach for transistor commutation is typically adopted in Radio Frequency amplifier design but also becomes very valuable in power converter design when the very fast commutations of a GaN HEMT at a high switching frequency cannot be fully described and taken under control with conventional approaches used in power electronics design. The simulation results are confirmed by experimental data.

Design, Characteristics And Application Of Pluggable Low-Inductance Switching Power Cell Of Paralleled Gan Hemts

Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A Tri-Slope Gate Driving GaN DC–DC Converter with Spurious Noise Compression and Ringing Suppression for Automotive Applications

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

10 Kw High Efficiency Compact GaN-Based DC/DC Converter Design

Virtual Prototype and GaN HEMT Based High Frequency LLC Converter Design

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

A GaN HEMT Integrated Power Module with Silver Sintering Processes

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

A Monolithic GaN Driver and GaN Power Switch with Power-rail Charging Saturation Bootstrap technique achieving gate rising and falling time ratio of 1.28

A Comparative Study on the Switching Performance of GaN and Si Power Devices for Bipolar Complementary Modulated Converter Legs

Hybrid Double-Side Cooled Package for Multichip GaN Power Module with Optimal Current Sharing at High Switching Speed

A Parallel Vertical Structure (PVS) Used in Highly Integrated GaN-Based Power Modules

A Novel Cascode GaN Switch Integrating Paralleled GaN DHEMTs for High-Power Applications

Investigations on Driver and Layout for Paralleled GaN HEMTs in Low Voltage Application

Paralleled Operation of High-Voltage Cascode Gan Hemts

Gallium nitride based power switches for next generation of power conversion

Accurate Evaluation of Commutations of 650 V GaN Power Switches Assisted by Electromagnetic Simulations in a 7 kW Dual Active Bridge Converter for Automotive Battery Charging Applications

Paralleled GaN DHEMTs Integrated Cascode GaN Switch for High-Current Applications