Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Lower Extremity Exoskeleton for Stair Climbing Augmentation

Active Knee Joint Exoskeleton for Stair Ascent Augmentation

Preliminary Evaluation of a Lower-Limb Exoskeleton - Stair Climbing

Stair-ascent Strategies and Performance Evaluation for a Lower Limb Exoskeleton.

Lower Limb-Assisted Exoskeleton to Support Walking Up and Down Stairs

An Adaptive Stair-Ascending Gait Generation Approach Based on Depth Camera for Lower Limb Exoskeleton.

Exoskeleton Design Utilizing Foot-Strike Energy for Enhancing the Climbing Ability of the Wearer

Adaptive Stair-Ascending and Stair-Descending Strategies for Powered Lower Limb Exoskeleton

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Learning and Planning of Stair Ascent for Lower-Limb Exoskeleton Systems.

A Lower Extremity Exoskeleton System for Walking Assist

A Hip-driven exoskeleton for Walking Assistance based on a Clutch-type Elastic Actuator

Gait Planning with Dynamic Movement Primitives for Lower Limb Exoskeleton Walking Up Stairs

A Novel Portable Lower Limb Exoskeleton for Gravity Compensation during Walking

Development of a Wearable Multi-Sensor System for Lower Limb Joint Torque Evaluation During Stairs Climbing

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

Design of a passive lower limb exoskeleton for walking assistance with gravity compensation

Ergonomic dual four-bar linkage knee exoskeleton for stair ascent assistance

A Novel Weight-Bearing Lower Limb Exoskeleton Based on Motion Intention Prediction and Locomotion State Identification.

Mechanical design of a passive lower-limb exoskeleton for load-carrying assistance

Design and Evaluation of a Self-Aligning Knee Exoskeleton for Knee Extension Assistance During Walking