Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Theoretical investigation on the effect of fluorine and carboxylate substitutions on the performance of benzodithiophene-diketopyrrolopyrrole-based polymer solar cells

Benzodithiophene/Benzothiadiazole-Based ADA-Type Optoelectronic Molecules: Influence of Fluorine Substitution

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Influence of Difluoro Regio-Substitution Variations of Donor Polymers on the Non-Fullerene Solar Cell Performance

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

Exploring the fluorination effect mechanism on charge transport in organic solar cells

Elucidating fluorination effect on benzodithiophene-based donor material in organic solar cells

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole

Donor-Acceptor Photovoltaic Polymers Based On 1,4-Dithienyl-2,5-Dialkoxybenzene With Intramolecular Noncovalent Interactions

A Fluorine-Functionalized Alternating Polymer with Benzo[1,2-B:4,5-B ']dithiophene and Quinoxaline Segments for Photovoltaic Devices

Designing and theoretical study of fluorinated small molecule donor materials for organic solar cells

Impact of fluorine substituted π-bridges on the photovoltaic performance of organic small-molecule donor materials

Effect of fluorine on the photovoltaic properties of 2,1,3-benzothiadiazole-based alternating conjugated polymers by changing the position and number of fluorine atoms

Intermolecular Interactions, Morphology, and Photovoltaic Patterns in p-i-n Heterojunction Solar Cells With Fluorine-Substituted Organic Photovoltaic Materials

Rational Design of Small Molecular Donor for Solution‐Processed Organic Photovoltaics with 8.1% Efficiency and High Fill Factor Via Multiple Fluorine Substituents and Thiophene Bridge

Density functional theory study of donor–acceptor conjugated polymers with substituent effect

Charge Photogeneration and Recombination in Fluorine-Substituted Polymer Solar Cells

DFT and TD-DFT study on the structural and optoelectronic characteristics of chemically modified donor-acceptor conjugated oligomers for organic polymer solar cells

Revealing the Position Effect of an Alkylthio Side Chain in Phenyl-Substituted Benzodithiophene-Based Donor Polymers on the Photovoltaic Performance of Non-Fullerene Organic Solar Cells

Benzo[1,2‐b:4,5‐b′]difuran Based Polymer Donor for High‐Efficiency (>16%) and Stable Organic Solar Cells