Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole

A Fluorine-Functionalized Alternating Polymer with Benzo[1,2-B:4,5-B ']dithiophene and Quinoxaline Segments for Photovoltaic Devices

Novel Alternating Dioctyloxyphenylene Vinylene-Benzothiadiazole Copolymer: Synthesis and Photovoltaic Performance

Synthesis of a Terpolymer Containing Fluorene, Side Chain Conjugated Thiophene and Benzothiadiazole and Its Applications in Photovoltaic Devices

Synthesis and photovoltaic properties of an alternating polymer based fluorene and fluorine substituted quinoxaline derivatives

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Donor-Acceptor Photovoltaic Polymers Based On 1,4-Dithienyl-2,5-Dialkoxybenzene With Intramolecular Noncovalent Interactions

An alternating polymer with fluorinated quinoxaline and 2,7-carbazole segments for photovoltaic devices

Synthesis of Two Benzo[1,2-B:3,4-B′]dithiophene-based Conjugated Polymers with Different Side Chains and Their Applications in Photovoltaic Devices

Synthesis and photovoltaic properties of a copolymer of benzo[1,2- b:4,5- b']dithiophene and bithiazole

A Copolymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Quinoxaline Derivative for Photovoltaic Application

An alternating copolymer of fluorene donor and quinoxaline acceptor versus a terpolymer consisting of fluorene, quinoxaline and benzothiadiazole building units: synthesis and characterization

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Effect of fluorine atoms on optoelectronic, aggregation and dielectric constants of 2,1,3-benzothiadiazole-based alternating conjugated polymers

Synthesis and photovoltaic properties of alternative copolymers of benzo[1,2-b:4,5-b′]dithiophene and thiophene

Donor Copolymer with Benzo[1,2-B:4,5-B′]dithiophene and Quinoxaline Derivative Segments for Photovoltaic Applications

Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control

Tuning Photovoltaic Performance Of 9,9-Dioctylfluorene-Alt-5,7-Bis(Thiophen-2-Yl)-2,3-Biphenylthieno[3,4-B] Pyrazine Copolymeric Derivatives By Attaching Additional Donor Units In Pendant Phenyl Ring

Synthesis, optical and electrochemical properties new donor–acceptor (D–A) copolymers based on benzo [1,2- b :3,4- b 0 :6,5- b 00 ] trithiophene donor and different acceptor units: Application as donor for photovoltaic devices

Copolymers from benzodithiophene and benzotriazole: synthesis and photovoltaic applications