Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Fluorine-Functionalized Alternating Polymer with Benzo[1,2-B:4,5-B ']dithiophene and Quinoxaline Segments for Photovoltaic Devices

Donor Copolymer with Benzo[1,2-B:4,5-B′]dithiophene and Quinoxaline Derivative Segments for Photovoltaic Applications

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole

An alternating polymer with fluorinated quinoxaline and 2,7-carbazole segments for photovoltaic devices

A Copolymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Quinoxaline Derivative for Photovoltaic Application

Enhanced Photovoltaic Properties of Di(dodecylthiophene)-Alt-2,3-di(3-octoxylphenyl)-5,8-dithieno[3,2-b]thiophene 6,7-Difluoroquinoxaline Copolymer by Fluorination

Synthesis and photovoltaic properties of an alternating polymer based fluorene and fluorine substituted quinoxaline derivatives

2d Pi-Conjugated Benzo[1,2-B:4,5-B ']Dithiophene- And Quinoxaline-Based Copolymers For Photovoltaic Applications

Quinoxaline based A-A Type Polymer Donors for Non-Fullerene Polymer Solar Cells

Novel Alternating Dioctyloxyphenylene Vinylene-Benzothiadiazole Copolymer: Synthesis and Photovoltaic Performance

An alternating copolymer of fluorene donor and quinoxaline acceptor versus a terpolymer consisting of fluorene, quinoxaline and benzothiadiazole building units: synthesis and characterization

Conjugated Polymers of Fused Bithiophenes with Enhanced Π-Electron Delocalization for Photovoltaic Applications

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

High‐Efficiency Polymer Solar Cells over 13.9% with a High VOC Beyond 1.0 V by Synergistic Effect of Fluorine and Sulfur

Photovoltaic Performances of Two Alternating Polymers Having Meta-Octyloxy-phenyl Modified Dithieno[3,2-F:2′,3′-H]quinoxaline Unit

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Donor Polymers Containing Benzothiadiazole and Four Thiophene Rings in Their Repeating Units with Improved Photovoltaic Performance

Synthesis and Photovoltaic Properties of New Conjugated Polymers Based on Di(2-Furyl)thiazolo[5,4-d]thiazole and Benzo[1,2-B:4,5-B′]dithiophene

Incorporation of Fluorine Onto Different Positions of Phenyl Substituted Benzo[1,2-B:4,5-B ']dithiophene Unit: Influence on Photovoltaic Properties

Fluorinated Phenanthrenequinoxaline-Based D-A Type Copolymers for Non-Fullerene Polymer Solar Cells

Unsubstituted Benzodithiophene-Based Conjugated Polymers for High-Performance Organic Field-Effect Transistors and Organic Solar Cells