Abstract:Threads are small in size and complicated in structure, and cause great difficulty in finite element analysis of the nonlinear contact interaction. For this reason, threads are usually neglected during the strength simulation analysis of mechanical parts. In fact, parts bearing heavy cyclic loads usually fatigue and fracture from the internal threads, thus their fatigue strength is necessary to be checked in the design stage. To solve this problem, an approach based on stress conversion is proposed to analyze the high-cycle fatigue strength of the internal threads. In this approach, the stress at the thread roots is decomposed into near-source stress and far-source stress. The contact pressure and friction calculated from simplified model without threads are conversed into near-source stress and far-source stress and then superposed into the maximum stress of thread roots. Afterwards, taking the influence of stress gradient, survival probability and surface roughness into account, the fatigue safety factor of the internal threads are calculated employing Haigh diagram. Comparison is conducted between the proposed approach and the finite-element simulation and fatigue analysis of detailed model with threads, and shows the safety factor result of the proposed approach is 7.6% lower than the corresponding result of the detailed model. The proposed approach is also applied to a main bearing wall of a crankcase, its results is 8.2% lower than the fatigue test result, validating its feasibility.

Influence Analysis of Nonlinear Stress–Strain Behavior in Pulverizing Wheel of Fan Mill

Crack Cause Analysis of Pulverizing Wheel in Fan Mill of 600MW Steam Turbine Unit

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

A Comparison of Analysis Flywheel Stress Distributions Based on Different Material

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills

Residual Stress Distribution Design for Gear Surfaces Based on Genetic Algorithm Optimization

Experimental and Analytical Investigation for Fatigue Crack Growth Characteristics of an Aero-Engine Fan Disc

FINITE-ELEMENT STRESS ANALYSIS OF END-COVER RUPTURE FOR BALL MILLS

Influence of Choosing Different Types of Elements on the Strength Analysis of A Wheel

Stress-conversion-based Approach of High-cycle Fatigue Strength Analysis for Internal Threads

Finite Element Analysis of the Structure and Working Principle of Solid-State Shear Milling (S3M) Equipment

Influence mechanism of grinding surface quality of 20CrMnTi steel on contact failure

Analytical Study on the Cutting Force and Residual Stress in Whirlwind Milling of a Large Screw

On High Cycle Fatigue Characteristic of Locomotive Wheels

Static and Dynamic Analysis of a 6300 KN Cold Orbital Forging Machine

Stress Analysis and Strength Calculation Methods of Involute Spline Couplings

A Study on the Influence of Nonlinear Vibration on Fretting Damage of Involute Spline Pairs in Aero-Engines

The Influence of Prior Austenite Grain Size on Fatigue Crack Growth Threshold of Welds in Cr-Mo-V Steel Components

STRUCTURE STRENGTH ANALYSIS OF AUTOMOTIVE WHEELS