Abstract:Chemical looping hydrogen (CLH) process with renewable energy sources as fuel shows the potential of producing pure hydrogen with inherent capture of CO2 in a low-cost and sustainable way. The heavy fraction (HF) of bio-oil, derived from the fast pyrolysis of biomass and characterized as an energy carrier with difficulty in upgrading itself to bio-fuel or chemicals, was used in this study to generate H-2. Four low-cost iron-based oxygen carriers including an ilmenite and three iron ores were initially evaluated with respect to their reducibility and the ability to minimize carbon or iron carbide (Fe3C) formation in a thermogravimetric analyzer (TGA). The reactivity and cyclic performance of the selected best candidate was then assessed in a laboratory scale fixed-bed reactor with HF bio-oil as fuel. The screening test in TGA showed that ilmenite was superior over the three iron ores in terms of promoting CO conversion and minimizing carbon or Fe3C formation. Ilmenite could maintain its increasing reducibility with the increase of surrounding CO concentration, in contrast with the iron ores that were deactivated seriously by the formed carbon or Fe3C. Subsequent CLH test with ilmenite and HF bio-oil showed that the reducibility and H-2 production capacity of ilmenite were strongly dependent on the operating temperature. The steam oxidation step at 950 degrees C yielded H-2 concentration and hydrogen yield exceeding all of those observed at the other investigated temperatures because of the deepest reduction degree of ilmenite at 950 degrees C. The decrease in the reducibility and H-2 production capacity of ilmenite in the cyclic test could be ascribed to the poorer physical structure of ilmenite with cycles. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

The Reduction Mechanism and Kinetics of Fe2O3 by Hydrogen for Chemical-Looping Hydrogen Generation

Stepwise Reduction Kinetics of Iron-Based Oxygen Carriers by CO/CO 2 Mixture Gases for Chemical Looping Hydrogen Generation

Theoretical study of reduction mechanism of Fe2O3 by H2 during chemical looping combustion

Performance of Fe2O3/LaFeO3 as oxygen carrier in chemical-looping hydrogen generation

Reduction kinetics of iron-based oxygen carriers using methane for chemical-looping combustion

Reduction Mechanism of Iron Titanium Based Oxygen Carriers with H-2 for Chemical Looping Applications - A Combined Experimental and Theoretical Study

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Reactivity of iron oxide as an oxygen carrier for chemical-looping hydrogen production

Reactivity of Iron-based Oxygen Carriers Prepared by Wet and Dry Mixing Methods for Hydrogen Production Via Biomass Derived Syngas Chemical Looping

The Use of Ferrites As Highly Active Oxygen Storage Materials for Chemical Looping Hydrogen Production under Intermediate Temperature

Kinetic analysis of iron ore powder reaction with hydrogen—carbon monoxide

Hydrogen Production from the Steam-Iron Process with Direct Reduction of Iron Oxide by Chemical Looping Combustion of Coal Char

The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

Carbon Deposition During Reduction in Chemical-Looping Combustion with Fe-based Oxygen Carriers

Use of Heavy Fraction of Bio-Oil As Fuel for Hydrogen Production in Iron-Based Chemical Looping Process

Understanding the catalysis of noble metals in reduction of iron oxide by hydrogen: insights from DFT calculations

Activation Mechanism of Fe2O3-Al2O3 Oxygen Carrier in Chemical Looping Combustion

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Influence of Hydrogen Flow Rate on Multistep Kinetics of Hematite Reduction