Abstract:We have previously developed silicon-based light-emitting devices (LEDs) with luminescent erbium (Er)-doped TiO2 (TiO2:Er) films [Yang et al., Appl. Phys. Lett. 100, 031103 (2012)]. In an LED therein, the TiO2:Er film is sandwiched between the ITO film and heavily boron-doped p-type silicon (p+-Si). In this work, we have investigated the electroluminescence (EL) from two LEDs with the TiO2:Er films annealed at 650 and 850 °C, respectively. It is revealed that between the TiO2:Er film and p+-Si, there is an intermediate silicon oxide (SiOx, x ≤ 2) layer and its thickness increases from ∼4 to 8 nm with the increase of annealing temperature from 650 to 850 °C. Interestingly, the thickness of the intermediate SiOx layer is found to exhibit a profound impact on the EL from the LED with the TiO2:Er film on p+-Si. The EL from the LED with the 650 °C-annealed TiO2:Er film is activated only under the forward bias with the positive voltage connecting to the p+-Si substrate. Such EL consists of the oxygen-vacancy-related emissions from TiO2 host and the characteristic visible and ∼1540 nm emissions from the Er3+ ions, while the EL from the LED with the 850 °C-annealed TiO2:Er film can only be enabled by the reverse bias with the negative voltage applied on the p+-Si substrate. Such EL features only the visible and ∼1540 nm emissions from the Er3+ ions. The difference in the EL behaviors of the two LEDs as mentioned above is found to be ascribed to the different electrical conduction mechanisms.

Defect-Related Electroluminescence in the 1.2–1.7 Μm Range from Boron-Implanted Silicon at Room Temperature

Room-Temperature Near-Infrared Electroluminescence from Boron-Diffused Silicon Pn-Junction Diodes

Electron-beam-induced current evidence for room-temperature photoluminescence of silicon pn diode

Electroluminescence from Si Nanocrystal/c-Si Heterojunction Light-Emitting Diodes

Effects of Defect, Carrier Concentration and Annealing Process on the Photoluminescence of Silicon Pn Diodes

Defect-Related Electroluminescence from Metal-Oxide-Semiconductor Devices with Zro2 Films on Silicon

Electroluminescence from Metal–oxide–semiconductor Devices Based on Erbium Silicate Nanocrystals and Silicon Nanocrystals Co-Embedded in Silicon Oxide Thin Films

Luminescent and Structural Properties of Electron-Irradiated Silicon Light-Emitting Diodes with Dislocation-Related Luminescence

Electroluminescence of Silicon-Rich Silicon Nitride Light-Emitting Devices

Structural and Luminescent Properties of Electron-Irradiated Silicon

Sensitized Electroluminescence from Erbium Doped Silicon Rich Oxynitride Light Emitting Devices

Enhanced silicon band edge related radiation: Origin and applicability for light emitters

Fabrication of Light-Emitting Diodes with Dislocation-Related Luminescence by Annealing of Electron-Irradiated Silicon

1.5 Μm Luminescence of Silicon Nanowires Fabricated by Thermal Evaporation of SiO

Near-infrared and Mid-infrared Light Emission of Boron-doped Crystalline Silicon

Dislocation-related electroluminescence of silicon after electron irradiation

Enhancement of Room Temperature Dislocation-Related Photoluminescence of Electron Irradiated Silicon

Electroluminescence from Silicon-Based Light-Emitting Devices with Erbium-Doped TiO2 Films Annealed at Different Temperatures

Low-voltage Driven ∼1.54 Μm Electroluminescence from Erbium-Doped ZnO/p+-Si Heterostructured Devices: Energy Transfer from ZnO Host to Erbium Ions

Electroluminescence from Metal-Oxide-semiconductor Devices with Erbium-Doped CeO2 Films on Silicon

The Origin of 0.78 Ev Line of the Dislocation Related Luminescence in Silicon